The original "Black Pearl" Shooting truck
2.5l diesel with approx 150k on it (still in use)
MOT until Feb 2026
Starts first time every time, pulls hard.
All transmission, brakes and engine working perfectly.
Body has been Raptor Coated in Matt Black
Disappears in the dark, just park up and wait for the targets to arrive.
Rear tub has had some "repairs", functional not pretty!
Have additional arch liners in rear that cover the chassis rails (and the stupid holes to catch mud!)
Chassis was cleaned and undersealed when I go it 4 years ago.
Has a small hole rear right rail.
Quick patch and weld job
Twin Battery version
LED headlights
Running 16" steels with Maxxis Wormdrives, still have 10-12mm thread on them
Comes with four spare wheels, one on truck, two loose (no use to me as the new one has 17"s)
Other improvements include:
Bad points:
Revised price to reflect bare truck with some needs
£1500 collected from Edinburgh or surrounding
2.5l diesel with approx 150k on it (still in use)
MOT until Feb 2026
Starts first time every time, pulls hard.
All transmission, brakes and engine working perfectly.
Body has been Raptor Coated in Matt Black
Disappears in the dark, just park up and wait for the targets to arrive.
Rear tub has had some "repairs", functional not pretty!
Have additional arch liners in rear that cover the chassis rails (and the stupid holes to catch mud!)
Chassis was cleaned and undersealed when I go it 4 years ago.
Has a small hole rear right rail.
Quick patch and weld job
Twin Battery version
LED headlights
Running 16" steels with Maxxis Wormdrives, still have 10-12mm thread on them
Comes with four spare wheels, one on truck, two loose (no use to me as the new one has 17"s)
Other improvements include:
- Drivers Door sensor disable switch - allows exit from vehicle without beeping when keys are in or sidelights are on
- Aftermarket radio with bluetooth
- Full set of waterproof seat covers in black
- Four sets of USB and Cigar plug charging points under heater controls (never have another flat thermal! I have a HIK 18650 charger mounted permanently, not included)
- Hardwired Cigar socket to battery for inboard hand held lamps (lamp not included)
- Trailer lights socket Relocated up onto panel above bumper and upgraded to 13 pin
- Full ABS rear tub liner
Bad points:
- Bolster on driver's seat is a bit squished, padded out and taped. all covered by seat covers
- Rear arches and tailgate have been fibreglassed to deal with rust..roughly. Functional but wont win any awards
- Roof a bit scuffed, but unless you are 7ft 3" you won't see it!
- Missing a centre oil pan front sump guard.
- Chassis hole needs welding
- Left front CV bit notchy
Revised price to reflect bare truck with some needs
£1500 collected from Edinburgh or surrounding
Attachments
Last edited:
