Wanted: 204 Ruger Brass

[Neddle]

Any 204 Ruger brass for sale?(Not Hornady)

 

[Cyres]

New or used.
Reloading Solutions may have some new. Appears only Nosler in supply at various places. V expensive.
D

 

[Neddle]

Used would do,definitely not looking for hornady

 

[Sandyb]

Used would do,definitely not looking for hornady

I’ve actually found Hornady pretty good… been shooting .204R for about 12-13 years now..

 

[Neddle]

I’ve actually found Hornady pretty good… been shooting .204R for about 12-13

No issues with neck tension?

 

[Sandyb]

No issues with neck tension?

No not at all.. only just now and i coming across the odd split neck, right at the top, but have had this brass from the beginning.
If you’ve enough of them and you rotate your batching, they’ll last you years… i generally gave 400 cases and only prep and reload once i’ve shot all of them

 

[Neddle]

No not at all.. only just now and i coming across the odd split neck, right at the top, but have had this brass from the beginning.
If you’ve enough of them and you rotate your batching, they’ll last you years… i generally gave 400 cases and only prep and reload once i’ve shot all of them

Found it difficult to get neck tension in 17H,222 204 and 6.5CM,even with annealing

 

[Millrace]

Hornady go bang fine with me,no idea about tension and the foxes dont ceem to care!

 

[cjs66]

Ive had no problem loading 204 with Hornady brass, got a great load with that and a 32g Varmageddon, 3850fps. Factory 32g Max only does 3800fps in my Tikka with a 19" barrel. I use Norma too, with the 39g BK and 10X. Good but expensive and my knees are fooked so I don't appreciate the crawling around looking for it if I don't catch it. Not too bothered if the Hornady goes missing. Still loose sleep over it though.
Winchester brass, now that's a different story, SHITE! I've had that brass split on first firing of virgin brass. It's wafer thin..

cjs

 

[Muffin man]

A friend of mine has around 480 once fired Hornady if your interested

 

[Cyres]

Agree Winchester brass is terrible. After 2x reloads primer pockets stretched in fact some primers all but falling out.
I am currently using Nosler but do use some hornady from fired factory which seems OK. Years ago some of it was terrible. Saying that in the last batch of 100 Nosler 10% were defective splits/cuts in necks and what looks like weld splatter inside the neck

I did post on here about it.
D

 

[Dazb1967]

I’ve reloaded Hornady brass in 204 for a good while now and never had any issues at all

 

[6.5-284austin]

A friend of mine has around 480 once fired Hornady if your interested

Could you pm me his details please ill take them off him

 

[204rips]

As above I’ve had no issue with reloading Hornady in .204r

 

[DavyG]

Been reloading Hornady brass for while. Still using a batch of 50 with 5 usage. Neck sizing only…no issues.
DG