Sold: 204 ruger sizing die

[Outandabout-goneshooting]

Long shot, but I have managed to snap the de capping pin in a lee full length sizing die. The lead time for just the stem is 3/6 months.

Looking for the whole fl die or a SH set of .204 ruger dies to replace before buying new. Ideally the lee pacesetter ones but anything considered.

Thanks
Dan.

 

[Eric the Red]

Might be more than you want to spend - but I have a set of Forster here.
I'm between Ross and Monmouth

 

[Cyres]

Sportsman Exeter showing stock. £19 for Lee FL die.
What have you broken?
If its the actual pin then use a masonry nail chopped down. I might have some spare pins.
Alternatively buy a Lee universal de capping die to remove primers. Then FL size with your die
D

 

[Outandabout-goneshooting]

Might be more than you want to spend - but I have a set of Forster here.
I'm between Ross and Monmouth

Thank you. I'm looking at £19 so far from sportsman and guessing the forster will be much more than that. Thanks for the reply though.

 

[Outandabout-goneshooting]

Sportsman Exeter showing stock. £19 for Lee FL die.
What have you broken?
If its the actual pin then use a masonry nail chopped down. I might have some spare pins.
Alternatively buy a Lee universal de capping die to remove primers. Then FL size with your die
D

Thank you. I found them last night so this may be the best option.

This is what I have snapped the end off, albeit in 204 not .223 which is annoying as they don't seem to sell a .204 version. Lee .223 Ez X Exp/Decapper Se2172

Thanks for the help.

 

[Reynolds1415]

I have a rcbs fl die set which also has a lee decapper in there, £50 +pp

 

[Outandabout-goneshooting]

Sorry, have been away. All sorted now thanks. Thank God for the spares drawer in the gunshop!