For years, I've used 39grn Blitzking homeloads or 40grn Hornady factory loads. I have a few boxes of Hornady 32-grain factory ammo. Are any 204 owners using 32-grain ammo? If so, what are your thoughts?
My howa 204 loves them and never had a problemFor years, I've used 39grn Blitzking homeloads or 40grn Hornady factory loads. I have a few boxes of Hornady 32-grain factory ammo. Are any 204 owners using 32-grain ammo? If so, what are your thoughts?
I use the 39gn SBK in my .20Prac with now Reloder10x and have no complaints … used to use Vhit n133 but that gave me a real headache with acidic moisture marking the next round’s bullet with verdigris after firing a round.Just thinking. I've a 20vartarg and had been told to use 39blitzking. Would that be to get the best possible performance out the little 221fireball case????
I'd suggest anything but Ramshot fella. I spent an age developing a lovely round for my .270 with Ramshot Hunter. Now I want to top up on it. Can I find any .... anywhere ? (within even logical driving distance)I use the 39gn SBK in my .20Prac with now Reloder10x and have no complaints … used to use Vhit n133 but that gave me a real headache with acidic moisture marking the next round’s bullet with verdigris after firing a round.
Shame that 10x is no longer available so I think I’ll go Ramshot Tac or Exterminator when I run out.
Cheers
Fizz
Joined this a bit late but all I use is 32’s and my Tikka T3 loves them, I did have some 39’s to use up and there was very little difference between the 2 regarding POI without zeroing, I went over to 32s because at the time they were easier to get in numbers, I also use N135 behind mine no problems at allFor years, I've used 39grn Blitzking homeloads or 40grn Hornady factory loads. I have a few boxes of Hornady 32-grain factory ammo. Are any 204 owners using 32-grain ammo? If so, what are your thoughts?