3d printed DIY quad sticks

[takbok]

Moijneer sticks - narrower than viper flex, I haven’t found it to be a problem View attachment 414848

Thanks, that's pretty much what I've got at the moment.

 

[takbok]

Looking forward to the shake down from Tim.

You and me both - waiting patiently...

 

[Tim.243]

You and me both - waiting patiently...

Got to Tool Station this morning then back home (under 10 mins all fitted) yes glue will need time to cure also strings fitted but as a kit very easy,
I used a slitting blade on the grinder but a hacksaw (recommend to use a fine blade) is the only item from any man cave required.
A spare Remington stock for the picture, I asked for1 large and 1 small V's as that is what I use.
10-10 Rory.
Tim.

 

[takbok]

Thanks Tim

 

[Tim.243]

Thanks Tim

Credit where credit is due.

 

[Gameking]

Rory, please advise when the first production models roll off the line PauperFlex

 

[takbok]

Rory, please advise when the first production models roll off the line PauperFlex

Will do - early May when I'm back from holiday.

 

[Flash G 74]

Got to Tool Station this morning then back home (under 10 mins all fitted) yes glue will need time to cure also strings fitted but as a kit very easy,
I used a slitting blade on the grinder but a hacksaw (recommend to use a fine blade) is the only item from any man cave required.
A spare Remington stock for the picture, I asked for1 large and 1 small V's as that is what I use.
10-10 Rory.
Tim.
View attachment 415080View attachment 415081View attachment 415082

Hello, The Large and Small Yokes look very good , Seems to hold the Stock well and a bit of front movement helps ,

 

[Tim.243]

Hello, The Large and Small Yokes look very good , Seems to hold the Stock well and a bit of front movement helps ,

Have you placed an order?

 

[paul o']

Well you know my next Question

 

[Flash G 74]

Have you placed an order?

Hello, No i was just giving my opinion, I only use a Tripod and not a Stalker

 

[Rbr1401]

Are you selling these if you made up a few ?

 

[takbok]

Are you selling these if you made up a few ?

Hopefully have a few ready to sell in a couple of weeks time.

 

[Rbr1401]

Perfect will keep any eye out

 

[Essexsussex]

Will do - early May when I'm back from holiday.

Me too please

 

[takbok]

I'm back from a lovely sunny holiday so making some progress again.

I've modified the bottom hinge to limit how far the sticks open front to back. I've also widened the front cradle from 90mm to 120mm - I'm not sure if I like the new proportions but it should be more useful and I will test it out.

The supplier has let me down with the black coated stainless screws delivery but has assured me that I'll have them on 15th May.

I'll hopefully get some uncoated stainless screws and green sticks by Monday/Tuesday so that I can put a couple of sets of sticks together for final checks before I start production.

 

[Ben23]

Looking forward to the paypal link

 

[Motard]

Hallo sir, I am also willing to buy one front & rear saddles.Possibly only rests & fiit joints , without garden canes being shipping to Rome, Italy. As far as I see concept is similar to 4Stable Sticks but with a wider legs opening that make it suitable for sitting shots. If you like, can pay in advance and You'll send me once You'll feel the final draw has been reached.
PS. did You ever think at a telescopic insert for the canes as to make them adjustable. This (to me) is the main issue with other similar sticks.

 

[takbok]

Thank you @Motard . I will let you know when I am ready to sell. Telescopic legs add too much complexity for me unfortunately.

 

[SSN100]

I'm back from a lovely sunny holiday so making some progress again.

I've modified the bottom hinge to limit how far the sticks open front to back. I've also widened the front cradle from 90mm to 120mm - I'm not sure if I like the new proportions but it should be more useful and I will test it out.

The supplier has let me down with the black coated stainless screws delivery but has assured me that I'll have them on 15th May.

I'll hopefully get some uncoated stainless screws and green sticks by Monday/Tuesday so that I can put a couple of sets of sticks together for final checks before I start production.

View attachment 418192 View attachment 418193

Looks good. I don’t think you need the extra width, but you can always make it an option. I’d personally opt for the flat top but narrower version as it keeps the wool package neater and I think give plenty of adjustment.