6.5 PRC moderator recommendations

[thefoxandthe.243]

I've just ordered a new rifle in 6.5 PRC, it will take approximately 6 months to come, so I'm looking at getting a few bits and pieces for when it arrives.

What moderators are people recommending? The thread is 5/8" - 24.

The barrel is 24" long, so my preference would be a reflex type over barrel moderator to keep overall length down.

It will be used predominantly for stalking and long range daytime foxes, but will be looking to do a little bit of long distance stuff now and again.

Thanks

 

[hendrix's rifle]

Dpt with the stainless baffle

 

[JH83]

I have just got one for a 7RM, stainless is best, PRC is similar in that it’s going to trash an alloy can fairly quick. I’d go ASE. I went Jet Z compact, an S5/7i would be good-fairly short too.

 

[labrador77]

I've a Jet Z on my 6.5 prc, works very well, my rifle has a 24" barrel too, didn't needn't to be an especially light or compact set up so I'm happy with it and I already owned the mod so just had to have the thread section changed at Jacksons.

 

[kenbro]

I've a Jet Z on my 6.5 prc, works very well, my rifle has a 24" barrel too, didn't needn't to be an especially light or compact set up so I'm happy with it and I already owned the mod so just had to have the thread section changed at Jacksons.

Viking now the agent for Ase mods.
KB.

 

[labrador77]

Viking now the agent for Ase mods.
KB.

Maybe for selling but I've just sent another one of my Jet z cqb mods for a new thread section to Jacksons.

 

[Radstorm]

Jet z or stalon that’s rated for it.

 

[Wsm]

Been using a Svemco Magnum for six months which tames the PRC very well

Expensive if its just for one rifle but with their QD system I can use it on three rifles

Svemko

Extreme Performance. Extreme Durability. Ultra-Lightweight.

www.svemko.com

 

[Mungo]

I've just ordered a new rifle in 6.5 PRC, it will take approximately 6 months to come, so I'm looking at getting a few bits and pieces for when it arrives.

What moderators are people recommending? The thread is 5/8" - 24.

The barrel is 24" long, so my preference would be a reflex type over barrel moderator to keep overall length down.

It will be used predominantly for stalking and long range daytime foxes, but will be looking to do a little bit of long distance stuff now and again.

Thanks

On my 6.5 PRC, I’ve used a DPT, an Atec Hertz and an Atec H2 or 3 (can’t remember which the current one is). Seen clients use all manner of things.

All much of a muchness.

I don’t think there’s enough in it to worry about.

 

[Lateral]

DPT over barrel "magnum", with additional stainless steel baffle, fitted as first baffle.

 

[thefoxandthe.243]

Ended up ordering the DPT Magnum with the stainless steel baffle.

 

[Rob-E]

I’m using a Stalon XE149 on my 7mm PRC. Interestingly all Stalon X series are magnum moderated but the longer back portion of the XE assists with the additional sound, heat and recoil of magnums.
I have Stalons on all my rifles and their customer service is second to none. If you’re looking to keep the length down get the XE108.

 

[One on top of two]

I use a jet z on mine , works