Wanted: HATSAN ESCORT 12G SEMI CHOKE TUBES.

bullet chucker

Well-Known Member
Hi SD massive, I need a set of chokes for the above,the set for the gun are misplaced. It is not an old gun the choke fitted is a flush fit, I under stand that extended chokes will also fit. A pm,or on this thread is acceptable.
Many Thanks in advance.

BC.
 
There’s a fella on GT that has a set or Im sure ive seen dealers who sell them brand new. Cheers.

 
I've got 4 of a set of 5 of unused extended chokes (full missing) for £25 posted if that helps?.
 
Hi Big Sparky,
Thanks for the reply, GT' ad is for the v3 chokes, so not suitable, the new' sets, I have seen advertised,but thought I would ask on here first.

BC
I've got 4 of a set of 5 of unused extended chokes (full missing) for £25 posted if that helps?.
Can/will you confirm they are V2 chokes, as if anything else, they will not fit my model,do you have the key ? If they are suitable I am interested.

BC
 
Hi Big Sparky,
Thanks for the reply, GT' ad is for the v3 chokes, so not suitable, the new' sets, I have seen advertised,but thought I would ask on here first.

BC

Can/will you confirm they are V2 chokes, as if anything else, they will not fit my model,do you have the key ? If they are suitable I am interested.

BC

Sorry - what's the difference between V2 and V3?. These are from the latest Edgar Bros. supplied Hatsan semi auto. They are extended and do not use a key.
 
Hi, v2 and v3 have different threads. It should be stamped v3 on the choke. If it is not' stamped v3, I am informed that it will be the v2 which will fit my gun. For extended chokes the same will apply. I thought you may of had a key any way,I am also looking for the plastic spacers as I just have the gun and one choke.?

BC.
 
Hi, v2 and v3 have different threads. It should be stamped v3 on the choke. If it is not' stamped v3, I am informed that it will be the v2 which will fit my gun. For extended chokes the same will apply. I thought you may of had a key any way,I am also looking for the plastic spacers as I just have the gun and one choke.?

BC.
Well every day's a school day!. Mine are etched V3, unfortunately.
 
Still looking v2 hatsan choke tubes, also need the stock adjustment spacers if any one has some lurking, gathering dust?

BC.
 
I possibly have some of the stock spacers! I shall have a check when I’m home at the weekend and let you know. Excuse the “thickness” on my part….. would the stock spacers have any element of cast to them? My Hatsan is LH - although unless I’m also making this up - so may yours be…. In which case the question is even dafter than I thought 😂😂
 
I possibly have some of the stock spacers! I shall have a check when I’m home at the weekend and let you know. Excuse the “thickness” on my part….. would the stock spacers have any element of cast to them? My Hatsan is LH - although unless I’m also making this up - so may yours be…. In which case the question is even dafter than I thought 😂😂
They come with stock spacers for LH and RH cast as well as for extending LOP
 
Yes' my Auto is a lefty, but sadly my seller misplaced the chokes and the stock spare parts, now I am on a mission to find some replacements,I hope you can come up with some spacers Big_Sparky.

BC.
 
Good luck with the choke key, mine was made of cheese.
If your Hatsan was new, did it have spacers fitted at the grip? I have just taken mine apart and there are TWO in place but are not marked with any size or orientation? I assume it has not been apart since it left the factory.
 
Back
Top