Innomount- Pulsar- Wraith


Well-Known Member
Hi guys, could do with a little help if anyone is in the know or have equipment to hand.
I'm after dropping my Sightmark Wraith closer to the barrel on my Tikka t3x .243, the centreline of the scope currently sits very high at 70mm from the boreline on its current Wraith mount on a tier one picatinny.
I wondered if it could fit onto an innomount/pulsar mount as they look similar and I could remove the picatinny off the rifle.
The mounting screw holes on the Wraith are 32mm centres, the flat seat at the bottom of the wraith is 7mm wide and the top of the tapers is 12mm wide.
Any help appreciated, many thanks.👍