Sans Culottes
Well-Known Member
Leapers UTG Heavy Duty - Heavy Action QD (Quick Detach) LE Grade Precision Machined 6 screw Scope Mount Rings for 25mm (1 inch) Tube scopes with objective lens upto 50mm
QD – Quick Detach allows rings to be attached or released quickly and easily – and when in place be absolutely rock solid against even mil grade shocks and bangs!
Suit scopes with lens sizes upto outer objective size maximum 55mm - approx. 44-46mm lens size maximum.
See Clearance Guide below to learn how to assess if they are the right height for you and if so how much clearance you will have over the base
For 20mm wide weaver/picatinny base - NOT airgun 9-11mm dovetail. To fit to 9-11mm rail an adapter is required. See Related products at bottom of page
Precision machined from aircraft-grade aluminum alloy with anodized black matte finish.
Easy to use spring tensioned design and fine adjustment mechanism that means they can be used on even low quality or worn rails.
Wear Resistance
Mil spec Type III class 2 hardcoat anodizing for scratch and wear resistance
Cross Bolt
Milled steel cross bolts to ensure the tightest possible tolerance and super firm grip on any weaver/picatinny rail.
Typically this mount is suitable for upto 50mm lens scopes. The Leapers stated measure is 55mm but that refers to the OUTER diameter of the lens where you must take the lens casing and, if you have them, things like flip up caps into account. If in doubt go up a size to high profile or ask me if unsure.
Used but in excellent condition
£15
Posted UK Mainland Only
Cheers
Chris
QD – Quick Detach allows rings to be attached or released quickly and easily – and when in place be absolutely rock solid against even mil grade shocks and bangs!
| Base Fitting: Weaver or Picatinny 20-22mm. Tube Size: To fit 25mm (1 inch) diameter body tube scopes. Medium height profile - Base to ring bottom (saddle) = 15mm |
Suit scopes with lens sizes upto outer objective size maximum 55mm - approx. 44-46mm lens size maximum.
See Clearance Guide below to learn how to assess if they are the right height for you and if so how much clearance you will have over the base
For 20mm wide weaver/picatinny base - NOT airgun 9-11mm dovetail. To fit to 9-11mm rail an adapter is required. See Related products at bottom of page
- Model: RQ2W1156 Medium profile (matte black)
- Material: Aluminum with steel fittings for - Great strength
Precision machined from aircraft-grade aluminum alloy with anodized black matte finish.
Easy to use spring tensioned design and fine adjustment mechanism that means they can be used on even low quality or worn rails.
Wear Resistance
Mil spec Type III class 2 hardcoat anodizing for scratch and wear resistance
Cross Bolt
Milled steel cross bolts to ensure the tightest possible tolerance and super firm grip on any weaver/picatinny rail.
- Robust and user friendly ergonomic Quick Detach/Lock lever.
- Fully adjustable to fit on any Picatinny rail.
- High quality synthetic protective tape applied on rings internal surface to protect scope body.
- Tight tolerance control and repeatable positive locking for optimal re-zero performance.
- Extensively field tested under extreme operations and well received by field experts and law enforcement personnel.
Typically this mount is suitable for upto 50mm lens scopes. The Leapers stated measure is 55mm but that refers to the OUTER diameter of the lens where you must take the lens casing and, if you have them, things like flip up caps into account. If in doubt go up a size to high profile or ask me if unsure.
Used but in excellent condition
£15
Posted UK Mainland Only
Cheers
Chris
