MDT Oryx

[Effnjeff]

I believe the Oryx comes with a 13" to 13.5" length of pull. I guess it's 13" with a 0.5" spacer?
Even at 13.5", it does seem pretty short as most rifles seem to measure around 14" LOP.
Does anyone here have an Oryx, and does it feel OK out of the box, or does it need even more spacers? These can be bought in a pack of 4x 0.25" spacers. Does anyone have any spares they wanna sell before I buy a pack, and chuck the spares in the drawer of 'stuff'.
Also, what bipod options have people gone for? I understand a swivel stud can be installed, or a stud can be added by the M-Lok rail. Does anyone have any recommendations?
Thanks in advance.

 

[T.eddie]

Got one on my howa, seems to fit me okay as far as I can tell, I got an mlok adapter which has the bipod stud and bought a bipod from monarch country products

 

[nun_hunter]

It was too short for me and I didn't want to pay the MDT spacer prices so had a friend print up a spacer block with his 3d printer. It's lighter than the spacers and as it's one piece it's stiffer too.

 

[mealiejimmy]

Just got one for my Tikka T1X and also got a pack of 4 spacers - I needed all of them
As for a bipod, I used the existing threaded hole to fit a standard swivel stud.

Cheers

Bruce

 

[Rusty Gate]

I like the fit & for the bipod I used the swivel stud thread with an M-loc rail.

 

[Effnjeff]

Thanks all for the info. I have a B&C on a Cz which measures 13.75" and feels a bit short to me. My Tikka measures 14" and is about right so I presume I will need a couple of spacers. I like the sound of the 3D printed version. It probably works out cheaper than the crazy £35+ for the MDT spacer pack too. I'm leaning towards an M-Lok bipod stud, but suspect I'll probably need a sit down after I find out how much it costs.

 

[T.eddie]

Thanks all for the info. I have a B&C on a Cz which measures 13.75" and feels a bit short to me. My Tikka measures 14" and is about right so I presume I will need a couple of spacers. I like the sound of the 3D printed version. It probably works out cheaper than the crazy £35+ for the MDT spacer pack too. I'm leaning towards an M-Lok bipod stud, but suspect I'll probably need a sit down after I find out how much it costs.

M-Lok Bipod Mount Adapter - MLok QD Bipod Stud | UK Freepost that's where I got mine from

 

[Effnjeff]

M-Lok Bipod Mount Adapter - MLok QD Bipod Stud | UK Freepost that's where I got mine from

Hey, that's more like it! Thanks.
I saw the MDT version of the same was around £30. It probably looks a bit more Gucci, but if it works the same then I'd rather save the difference.