For Sale: Primer tool and shell holders

[Northwest]

I have a couple LEE Auto-Prime hand priming tools, these are the early type with round primer trays, they are also Small OR Large primers, I do not have the changeover kits. They are £12 each posted to you. They are not RCBS quality but they do work.
Exactly like this:

I also have ONE set of LEE Auto-Prime Shell Holders it contains 1-2-3-4-5-7-8-9-10-11-19 shell holders I would also like £12 for this, posted.

I have LOTS and I mean LOTS of reloading spares, especially shell holders and trimming tools I need to sell/get out of the reloading room so if there is anything you are missing (screws, accessories) just ask. I would rather give them away for postage than throw them in the bin.

 

[farmer7]

Yes please. I'll have one priming tool and the shell holders please.

 

[dorani]

Hi Northwest, I'm looking for a Hornady Overall Length Gauge if it happens to be in your collection
Also looking for a stuck case removal tool set

 

[Donkey Basher]

Don’t suppose you have any shell holders for the RCBS hand primer do you?

 

[243ack]

I'll take the other one please. pm inbound

 

[fordy1967]

After a shell holder for 6.5mm CM and the same for a Lee Bench primer

 

[farmer7]

I've messaged the OP to withdraw my interest as I've just had an email from RCBS to say they'll replace my broken hand primer. So I assume one of the priming tools and shell holder kit is available again! Thanks.

 

[ShooterB]

"I have LOTS and I mean LOTS of reloading spares, especially shell holders and trimming tools I need to sell/get out of the reloading room so if there is anything you are missing (screws, accessories) just ask. I would rather give them away for postage than throw them in the bin."

Can you provide a list please?

 

[8x57]

Don’t suppose you have any shell holders for the RCBS hand primer do you?

You are aware that the RCBS hand primer takes the standard RCBS shell holder and not one similar to those used on the Lee hand priming tool?

I particularly mention RCBS shell holder because the hole where the primer plunger comes through is bevelled and those by other makers such as Lee are not. In the past I've altered other makes of standard shell holder by bevelling the hole so that it can be used with a RCBS hand priming tool.

 

[Cyres]

If you have a set of shell holders then I will take them.
Please DM bank details
Thanks
D

 

[Donkey Basher]

Yep, well aware - but hadn’t realised when I bought the thing in the first place

Useful to know that other makes of shell holder can be made to fit

I have got one genuine RCBS one, will have to look & compare it to the others I have to see what the difference actually is…

You are aware that the RCBS hand primer takes the standard RCBS shell holder and not one similar to those used on the Lee hand priming tool?

I particularly mention RCBS shell holder because the hole where the primer plunger comes through is bevelled and those by other makers such as Lee are not. In the past I've altered other makes of standard shell holder by bevelling the hole so that it can be used with a RCBS hand priming tool.

 

[grandad of the woods]

Any more shell holders for .243 think it's #2

 

[Northwest]

Any more shell holders for .243 think it's #2

Likely, I will take a look now.

 

[Eyefor]

..any chance you have an RCBS #10 shell holder please?