Wanted: Prochrono part wanted

[Matt234]

Does anyone have one of the steal bar's lying around as I've cut one of mine in half everything else is ok. Just thought I'd ask

 

[paul o']

shot it ? if you have your not the first but just use a bit of dowel rod to size or just a round of tape each end if its too small as its only to hold up the sun screen mty

 

[Matt234]

Missing about 1" and what's left is bent so if all else fails eBay don't mind doing a deal for the part have some 6mm bullets going spare

 

[paul o']

take it to B&Q they must have a bit of rod same size its about 5mm ?

 

[Alantoo]

The ones I have on BillH's borrowed Chrony are nearer Ø3mm / Ø1/8", so take the bits to a local welder and ask for a bit snipped off a Ø2.4 or Ø3.2mm stainless TIG rod?

Check the diameter and length and I can post a bit to you if I have the right size here.

Alan

 

[Tuck]

Think you can use the thinner chainsaw files