Quick Anneal - any experience??

I dont anneal brass ( mainly because its lost in the grass or damaged before its really required ) . however i have worked with coil annealers for steel and Heck its fast and accurate, Reasonable quality brass in most rifles will take ten firings without any change that is noticeable to a deerstalker
 
That's my interest in it well and truly gone! - I doubt VERY much that they retail for RSA 27,000 in SA.

Will stick to my trusty old Bosch battery drill, a 10mm or 12mm socket bit depending on cartridge involved & the propane/butane torch.
Try the Ugly Annealer
 
A friend has just bought one - a shade over £200 from Aus, he's pee'd off as he's been working in Aus & bought one for about £60 but sold it before he left, said he wished he'd just posted it home when he left!
I've had mine for over a year.
Think I paid £160 or thereabouts

Works well and less than anything of similar quality over here.
 
I've had mine for over a year.
Think I paid £160 or thereabouts

Works well and less than anything of similar quality over here.
I’ve had mine about the same time, used a home made one before that.
The ugly, is simple to setup , will anneal most if not all calibres as the bits come with it.
Requires very little setup and has UK and video support options , NO plastic parts on the heat side at all.
 
Back
Top