Rcbs 3way cutter

[howard01233]

About to buy a rcbs-90366 pro trim 2 case cutter.
Will be buying the drill adaptor to make it easier.
My question is the 3 way multi cutter you order caliber specific, but seen 2 videos saying I can buy 25-06 & 6.5 creedmoor 3 way pilot chamfer.
Another saying you have to buy 3way cutter for each caliber. But think it was an error. Don’t want to get and be missing a pilot

 

[Selous]

The 3 way cutter is different to the pilot that you would normally use. The Trim Pro is supplied with a 90 degree cutter that takes a small calibre specific mushroom shaped pilot to maintain support for the case mouth. Where this is used you need to deburr the outside and chamfer the inside as separate operations. The 3 way cutter replaces the standard cutting head and does all three operations in one go.
Hope this makes sense!

 

[howard01233]

The 3 way cutter is different to the pilot that you would normally use. The Trim Pro is supplied with a 90 degree cutter that takes a small calibre specific mushroom shaped pilot to maintain support for the case mouth. Where this is used you need to deburr the outside and chamfer the inside as separate operations. The 3 way cutter replaces the standard cutting head and does all three operations in one go.
Hope this makes sense!

Does the 3 way cutter do all calibers if I buy the different pilot for that cutter, the ones that come with the trim pro2 are for traditional cutter, Noth the 3 in 1

 

[howard01233]

So can I buy one cutter and loads of pilots

 

[howard01233]

Confusing understand you can order one of your calibers I will ring stockist

 

[Selous]

3 way cutters are calibre specific as far as I know

 

[howard01233]

3 way cutters are calibre specific as far as I know

But why can you buy separate pilots for them, and a few places but contradictory

 

[Selous]

They are a separate cutter head assembly that includes a pilot, not just a pilot