Wanted: Reloading Equipment (second-hand or new)

[Jack3]

I've been slowly buying various reloading bits and pieces (on a fairly tight budget) and I'm now almost ready to start reloading. Just missing the following items if anyone can help:

• Redding shell holder #1
• RCBS hand priming tool (or similar)
• Case loading block (for 6.5 cal)
• Case lube set
• Powder funnel
• Digital calipers
• Bullet puller hammer
• Case chamfer/deburr tool
• Primer pocket uniformer/cleaner/brush
• Case trimmer
• Dry tumbler
• Lyman 51st Reloading Handbook

Ideally after the items in new or very good second-hand condition. Based in Surrey and not far from Bisley.

Thanks!

 

[enfieldspares]

• Lyman 51st Reloading Handbook

My advice, for what it is worth, is go online and use the current powder manufacturer's data if you want the manual for load data. You'll otherwise be paying "top dollar" for information on UK Reach prohibited powders. Which will only serve to frustrate.

 

[Dav247]

Most of the list is not worth looking for used. Just as well put an order into Henry krank.
As far as digital calipers, I would recommend mitutoyo. I've had several cheap pairs and nothing but trouble.

 

[Cyres]

I have a Wilson case chamfer/deburring tool you can have. Also may have some other items.
D

 

[Woodlander]

I have an RCBS priming tool, I’ve lost the lid to the primer tray. Small and large primers.
RCBS chamfer tool
Lee plastic powder funnel
RCBS case lube pad
£45 posted

 

[Rhudson89]

If your interested I've got an rcbs case lube pad, 2 brushes and lube... £20 posted