Sold: Snake's Knives, Blade blank straight


Well-Known Member
I have just completed a new batch of blades and as the curved ones seemed popular, I thought I would offer some of these as well for anyone interested in putting there own handle on one.

The knife blade is roughly 4" long, 3mm thick and roughly 20mm deep. steel is 80CrV2 3mm thick hardened to approximately 55 - 60 hrc.

£48 inc P+P

It will be supplied as seen in the photo cleaned up with a 120 grit belt, it will need further finishing and sharpening, (don't sharpen fully until you have fitted the handle, they have been known to bite when being sanded if you slip ;) )