For Sale: Specialist Wild Boar Knife

Bowland blades

Well-Known Member
Client from Germany commissioned this build for his last line of defence during his Boar hunting .
I started two the second was just a spare blank and its this 2nd one i now with to sell as a finished to your own spec regards handle sheath etc . Guard and pommel will be like the finished one. handle will be whatever you require likewise sheath. High polish like this one or blasted etc , etc.
Steel type SF100 stainless
Hardness test 55/56 rockwell blade / 55/56 rockwell tang (BUILT specifically not to break AT THE WORST POSSIBLE TIME)
Threaded tang
5.5mm thick stock (5mm if full polish) ( like i say built not to break)
6" total blade length
10 3/4" total
Threaded bolster , (the knife can be done as a take down for cleaning)
304 stainless bolster and pommel
Handle shown is stacked Tuffnell
Edge will be shaving sharp
Sheath to your wishes as regards material and design i will include a picture of the one used for the example " best leather " with a leg tie and a longer than normal tag to release the popper .
IT REALLY IS BUILT FOR THE JOB OF DISPATCH AND A LAST LINE OF PROTECTION in use on potentially dangerous Quarry.
POA obviously to spec. Choose everything other than the blank and bolster / pommel.
DSC_0940.webpDSC_0941.webpDSC_0943.webp
 
The two blanks in the raw with the first just started before i remembered pictures. Threads are 5mm done by hand file work square to round.
The bolster or pommel are soft enough in 304 stainless to be engraved
 

Attachments

  • DSC_0903 - Copy.webp
    DSC_0903 - Copy.webp
    452.5 KB · Views: 48
Back
Top