Sold: Spuhr ISMS mount in FDE

[Mousegunner-UK]

Spuhr ISMS mount in FDE

34mm rings

13MIL/44.4MOA

Height 38mm/1.5"

Length 121mm/4.76"

Distance between rings 57mm/2.244"

Mounted once on rifle but due to the S&B scope I was using I had to remove as too much declination built in too allow full movement of scope turret.

Ideal for long range shooting where you need declination built into your mount.

£230 delivered RMSD

Advertised elsewhere.

 

[gaza916]

Hi I’m interested but will also be using a PMII 6-36 so could you elaborate a bit more about the issue you had so I don’t make the same mistake? Did you run out of elevation?

Thanks,

Gary

 

[Mousegunner-UK]

I ran out of elevation but I was using a PM11 3-12x50 so not a double turn like the 6-36x56.

 

[Mousegunner-UK]

I should add that the mount was fitted to a rifle with a 30moa rail attached to it, so overall I had 74moa built in before I tried to zero the scope; from memory the PM11 3-12x50 has a total of 95 moa (27MIL) built into it so when I got zeroed I only had approx 8.5MIL left on the turret and the turret is capable of 13MIL. If the rifle had 0moa rail on it I’d have had enough adjustment left to get the full range on the turret.

 

[Mousegunner-UK]

bump

 

[Mousegunner-UK]

Bump