For Sale: 6mm Dasher PRS setup

Incisor

Well-Known Member
So thought was moving away from shooting so sold all my gear then decided I’d try PRS but now may actually be moving

Have recently purchased new everything Gucci in the world of Relaoding and a rifle setup

The spec of the rifle is
Zermatt TL3 Action DLC coated with T1 contour barrel chambered for 6mm Dasher- 5/8 x 24 muzzle
thread, finished in black cerokote and proofed.
MPA DN3 Muzzle brake.
2 Stage Diamond, Pro curve Trigger.
MPA Matrix Pro chassis -tungsten, right hand.
Magazines optimised for the dasher

The build was spec by Josh at C2 precision and built by the same smith that Josh uses for his own winning comp rifles

Build cost just shy of £6k

Also have weight kits and a few other items

The rifle has had 15 rounds through it at a low load to run in the barrel only with the shoot 1 clean. Shoot 2 clean shoot 3 etc followed

Looking for around 4K but open to offers for a quick sale.

Buyer of rifle will have first refusal on all the other items listed below all of which are new and unised

Zco 527 mil rad optic with mpct2x scope and spuhr mount
Area 419 zero press
Area 419 s series dasher sizing die
Loads of other area 419 goodies
Amp annealer
Super trickler and amd scale
Cyke pod
Two vets tripod area 419 ball head
Pillows
Cases
Bags
Safes
Hornady 109s
Hornady 108s

Br4 primers
Cci SR Magnums
Muroms
N150
Rs70
And lots of other items

Located in midlands near Leicester

Will also be listing on varmiting forum

Anyone interested please pm so I get notified as I don’t always check the threads

Regards

Simon
 
Thankyou
For all that have messaged. Once rifle has gone to new owner it they don’t take the other bits I’ll start a new thread with details and prices

Many thanks

Simon
 
So thought was moving away from shooting so sold all my gear then decided I’d try PRS but now may actually be moving

Have recently purchased new everything Gucci in the world of Relaoding and a rifle setup

The spec of the rifle is
Zermatt TL3 Action DLC coated with T1 contour barrel chambered for 6mm Dasher- 5/8 x 24 muzzle
thread, finished in black cerokote and proofed.
MPA DN3 Muzzle brake.
2 Stage Diamond, Pro curve Trigger.
MPA Matrix Pro chassis -tungsten, right hand.
Magazines optimised for the dasher

The build was spec by Josh at C2 precision and built by the same smith that Josh uses for his own winning comp rifles

Build cost just shy of £6k

Also have weight kits and a few other items

The rifle has had 15 rounds through it at a low load to run in the barrel only with the shoot 1 clean. Shoot 2 clean shoot 3 etc followed

Looking for around 4K but open to offers for a quick sale.

Buyer of rifle will have first refusal on all the other items listed below all of which are new and unised

Zco 527 mil rad optic with mpct2x scope and spuhr mount
Area 419 zero press
Area 419 s series dasher sizing die
Loads of other area 419 goodies
Amp annealer
Super trickler and amd scale
Cyke pod
Two vets tripod area 419 ball head
Pillows
Cases
Bags
Safes
Hornady 109s
Hornady 108s

Br4 primers
Cci SR Magnums
Muroms
N150
Rs70
And lots of other items

Located in midlands near Leicester

Will also be listing on varmiting forum

Anyone interested please pm so I get notified as I don’t always check the threads

Regards

Simon
 
Back
Top