Zulus choice?

I bore sighted mine on a centered ret via shims on the mount.
My Ret is not far from center when zeroed. Thus the laser is close to zero.
Check my video.

Hi Sd;
So you use a zero mount but it’s shimmed?
If that’s so, would you not be better with some inclination built in?
Cheers, Ken.
 
That no longer applies.
If you buy a Zulus scope now, you get a 20moa rail
If you want a different rail you have to buy it as an extra

Cheers

Bruce
Not true according arken uk website
 
Try actually buying a scope from the site you linked to - you can't because it's now DNT Optics and this is the correct site

Cheers

Bruce
 
Try actually buying a scope from the site you linked to - you can't because it's now DNT Optics and this is the correct site

Cheers

Bruce
Yes you are right , 👍🏻
 
Both are Arken zulus v1 5-20

On my RWS titan 6 6.5x55 I have a 0 moa picatinny rail with a 20 moa bracket and the reticles are spot on.

On my tikka t3 .308 I have a 20 moa picatinny rail with a 20 moa bracket this puts the reticle high up on the screen on 5 power. The reticle move down on 7.5 power then centerlises at 10 power.
Instead of shimming If i bought a 0 moa bracket would that help to center the reticle
 
Both are Arken zulus v1 5-20

On my RWS titan 6 6.5x55 I have a 0 moa picatinny rail with a 20 moa bracket and the reticles are spot on.

On my tikka t3 .308 I have a 20 moa picatinny rail with a 20 moa bracket this puts the reticle high up on the screen on 5 power. The reticle move down on 7.5 power then centerlises at 10 power.
Instead of shimming If i bought a 0 moa bracket would that help to center the reticle
Sounds like the right option. Will the tikka rail turn around though?
 
I would sooner leave the rail as it is . So I could put the zeiss back on if needed without changing the rail back around
When i am away stalking for a few days I always have a spare scope with me.
 
Back
Top