Everlong
Well-Known Member
Selling my much loved Delta Titanium HD 2.5 -15 x 56 scope due to switching to digital.
Optics are totally clear and clean, no scratches or marks.
Illuminated 4A-S reticle in the second focal plane, red dot works perfectly and is beautifully adjustable from bright enough for full sunlight to barely visible in the lowest of light conditions.
Light transmission is phenomenal at 93% - outperforms many so-called Alpha brand scopes in low light when compared side by side.
The image is crisp and sharp, parallax or side focus is also included which makes it perfect for the addition of a NV or IR add-on should you need it.
Vortex defender caps are included - the eyepiece one is cable tied in place having lost one in the past. The objective cap has a small piece removed on the underside to ensure no contact with the barrel when it was mounted on my T3. Without the cut out it touched. Still a secure fit and the cut is invisible when the scope is mounted.
Only negative is a very small chip in the surface finish which could easily be hidden by the rings - this was caused entirely by me when I had to drill out a screw in a set of rings that refused to budge. You guessed it, the drill slipped and caught the tube causing a little chip that I repaired with DIY anodising - or to you and me a Sharpie.
Doesn't affect the scope performance in any way whatsoever.
Looking for £450 including shipping or best offer.
Optics are totally clear and clean, no scratches or marks.
Illuminated 4A-S reticle in the second focal plane, red dot works perfectly and is beautifully adjustable from bright enough for full sunlight to barely visible in the lowest of light conditions.
Light transmission is phenomenal at 93% - outperforms many so-called Alpha brand scopes in low light when compared side by side.
The image is crisp and sharp, parallax or side focus is also included which makes it perfect for the addition of a NV or IR add-on should you need it.
Vortex defender caps are included - the eyepiece one is cable tied in place having lost one in the past. The objective cap has a small piece removed on the underside to ensure no contact with the barrel when it was mounted on my T3. Without the cut out it touched. Still a secure fit and the cut is invisible when the scope is mounted.
Only negative is a very small chip in the surface finish which could easily be hidden by the rings - this was caused entirely by me when I had to drill out a screw in a set of rings that refused to budge. You guessed it, the drill slipped and caught the tube causing a little chip that I repaired with DIY anodising - or to you and me a Sharpie.
Doesn't affect the scope performance in any way whatsoever.
Looking for £450 including shipping or best offer.
