After some once fired hornady 6.5prc brass if anyone is selling. Cheers
Wanted: 6.5prc hornady brass
- Thread starter hendrix's rifle
- Start date
Shame you were not at Eskdalemuir, I left near a hundred on the points.
Ronin
Distinguished Member
Shame you were not at Eskdalemuir, I left near a hundred on the points.
That’s going to make competing a spendy affair Steve
Find their stuff sub optimal for reloads.That’s going to make competing a spendy affair Steve
Find their stuff sub optimal for reloads.
I discovered it wasn't as bad as I was expecting, after finding I'd mixed some Lapua, & Hornady cases during some load development
The one caveat, is that I annealed all the cases prior to reloading.
Both the Lapua, & Hornady cases I have, measure an average of 68.4g H20, and having accidently shot a number of mixed groups, averaged an ES of between 6, & 12fps, and two 3 shot grp's measured circa .27".
I'm more than happy to use them if pre'd properly, but I've yet to see how many times they'll go.
Hi
I have 40 once fired in the box's free.
They were given to me as I was going the 6.5 PRC route
now going 7mm PRC instead.
PM me an address I will send them to you.
Just put a donation in a H4H box next time you pass one.
Steve.
I have 40 once fired in the box's free.
They were given to me as I was going the 6.5 PRC route
now going 7mm PRC instead.
PM me an address I will send them to you.
Just put a donation in a H4H box next time you pass one.
Steve.
That's very unfortunate! I've lost one or two but nearly 100Shame you were not at Eskdalemuir, I left near a hundred on the points.
I have also just seen they are doing norma brass for them!
Very generous of you, I shall send you a PM.
Thanks
Similar threads
