Today at work I.....

[Smellydog]

They come flat packed like Ikea Phil

Still plenty to get wrong...

 

[Tim.243]

View attachment 438265View attachment 438266
Still plenty to get wrong...

Yes First or Third angle projection is the killer....

 

[Smellydog]

Two leaks, all fixed.

 

[Smellydog]

Another tank yesterday and today. One leak this time.
Did a few videos.
Some find welding around bosses and circular pieces difficult but if you start off in the most awkward feeling position it only ever gets easier as the weld goes on.


Then had to Tig the smaller fittings.

 

[Craigsaun]

Again SD , excellent work, keep them coming

 

[Smellydog]

Diesel tanks today but have to make some sender flanges or a pump flange.
Anyway, burnt some rings for machining.

The above tool post fastener I made utilising and air rifle barrel!

 

[Flash G 74]

Hello, Do you not use a Plasma Cutter ??

 

[Smellydog]

Hello, Do you not use a Plasma Cutter ??

Have done but we are currently sited in a company that has laser's.

 

[Smellydog]

One flange nearly done.

 

[Smellydog]

Hello, Do you not use a Plasma Cutter ??

Lol, I just twigged why you may ask...
My colleague ordered a laser cut ring but it came to size so there was nothing to machine.
It was quicker to pinch some plate and burn it myself etc.

 

[trigger7335]

I cast a load of door knockers! Also a load of other not as interesting stuff.

 

[Craigsaun]

Lol, I just twigged why you may ask...
My colleague ordered a laser cut ring but it came to size so there was nothing to machine.
It was quicker to pinch some plate and burn it myself etc.

A true craftsman

 

[shakey jake]

today i killed hornets, wasps and installed fly machines, not quite the enginering as shown above, but earnt a wage

 

[Mountain Bug]

today i killed hornets, wasps and installed fly machines, not quite the enginering as shown above, but earnt a wage

You've piqued my curiosity. What, may I ask is a fly machine?


Scott

 

[shakey jake]

You've piqued my curiosity. What, may I ask is a fly machine?


Scott

a blue light, with w
either an electric grid or a sticky board, normally in a commercial kitchen

 

[MarinePMI]

We call them "bug zappers" here...

 

[Smellydog]

today i killed hornets, wasps and installed fly machines, not quite the enginering as shown above, but earnt a wage

Hey, rather you than me!
I was out yesterday evening and a hornets nest was near there was that many. Give me the creeps they do

 

[Smellydog]

Are they called fly machines so the vegans don't get upset, to much?

 

[shakey jake]

Are they called fly machines so the vegans don't get upset, to much?

i normally call them EFKs electronic fly killers.
i dont think it matters what you call them vegans are always upset

 

[kenbro]

We call them "bug zappers" here...

I like the American term for our Strimmers…….Weed Wacker?
Ken.
KB.