Wanted: MDT Stock spacers
- Thread starter Deerless
- Start date
There are a few 3D printed ones on eBay, and Bagnall and Kirkwood say they have stock
reality bites
Well-Known Member
MDT chassis Spacer Length of Pull kit (Oryx Xrs) - 2x10mm and 1x5mm | eBay UK
MDT oryx and XRS length of pull chassis kit. Included in the kit is two 10mm extensions and one 5mm extensions enabling length of pull to be extended in 5mm increments to 25mm. (I’ve shown one of each as an example of what they will look like) If you’d like a more specific kit, please message me...
ebay.us
https://www.ebay.co.uk/itm/235406826569
Attachments
Last edited:
If your stock is an MDT oryx - https://www.ebay.co.uk/itm/197171766310
reality bites
Well-Known Member
Are the bolts used 10/32 unc or unf?
reality bites
Well-Known Member
What did they say
I bought mine from B&K last week, definitely NOT imperial thread bolts lol
reality bites
Well-Known Member
I thought everything MDT wise was imperial ? What are they then as mdt had advised 10/32?
Mine are M5x0.8. I measured them using a thread gauge. No idea if that’s close to whatever 10/32 means, sorry
reality bites
Well-Known Member
10/32 will be just under an m5 so maybe you got lucky
Did anyone find out what the correct bolts were for this job, iv just tried the longer bolts from my XRS stock in the oryx and they fit if you only put 3 extra spacers in, there 2" so for 4 extra spacers will probably need 2 1/2" bolts, iv seen what i think are correct ones on ebay but in packs of 10 at £14.50, coupled with the 3D printed spacers on ebay at £14, i may as well buy the originals at £34
Fowler1990
Well-Known Member
Ive got some i think....
are you boasting, or are they for sale
Fowler1990
Well-Known Member
He or she can have them for nothing if i find them!
He or Me
Similar threads
