For Sale: Magnetic Rifle Holders for Gun Safes, & Cabinets..............................................

[Lateral]

These holders are designed for rifles, & I'll post options for Shotguns, & double rifles as soon as I can.

ALL of the options include the delivery.

Prices for the complete barrel holder, either length, choice of clamp size, & colour:

QTY: 1 £36.00

QTY: 2 - 4 £33.00

QTY: 5 - 9 £29.00

The measurement is taken from the base of the holder, to the middle of the clamp hole / centerline of the barrel. These lengths may vary by +/- a few millimeters.

SHORT OPTION:.................................85mm - 115mm.

LONG OPTION:...................................105mm - 145mm. This covers 99% of rifles, including rifles using sights with an objective of up to 60mm or more.

BARREL CLAMP SIZES: 16-17mm, 19mm, & 22mm.

COLOUR OPTIONS: Black, Red, Orange, Blue, Yellow, & Green. The colours are brighter in reality, than the picture would suggest.

If you have any questions, or I've forgotten to mention some detail/information you'd like, please PM, or call me.


Mark / 07802-306444

 

[Tommy2bucks]

I’ll measure up and get back to you pal

 

[bowji john]

Hi Mark

You planning something similar to hold mods?

J

 

[Lateral]

Hi Mark

You planning something similar to hold mods?

J

John,

Strangely, I only mentioned that very thing to someone yesterday, because they are a royal PITA to store

I'm just doing some designs now, and will post something soon, also looking at a couple of other things I want for myself, so others might like them too.

 

[Lateral]

I have added a clamp for 410's (15mm) and also a 25mm for the larger diameter semi-auto's, or for example, I use one for my K95 stutzen.

I have modified the "long" holder, which is now 100mm -135mm, and still covers a 56mm objective, and I'll be offering a even shorter version, which will better suit side mounting.

All the clamp sizes, & colours, and 100-135mm holders are in stock.

Mark

 

[Lateral]

Clamps now available for both Over & Under & Side by Side shotguns, and double rifles. Also, an ultra short holder that's great for fitting to the side of the safe, or for very shallow shotgun safes.

I have sizes for O&U, and SxS 20G, O&U 12b, & 9.3 x 74R Rifle, and I'll be looking to increase the range, as I can gather more sizes.

All clamps fit all of the holders.

 

[Lateral]

Nudge................

 

[Lateral]

Hi Mark

You planning something similar to hold mods?

J

John,

You asked, I listened

There are only so many ways to hold a moderator, and this modular design allows me to swap parts around to suit. It also means, that assuming people don't mind some very simple assembly, it will be cheaper to post, getting it within the 25mm large letter format.

I didn't like the first couple of test prints, but think I have it right now. Just need to make a couple of adjustments to the design, and I'll be ready to offer them.

At the moment, I'm using two 25mm diameter magnets, that are in line with the two rings, and are bolted in place, through the back, & and rings. The back is recessed for the rings to sit into, for better strength.

It will take a little time for me to work out the most popular sizes, but 45mm & 50mm seems to cover many, but I can make to any size, mostly !

Thoughts ?

Mark

 

[bowji john]

Very clever

I like it

J

 

[Lateral]

Very clever

I like it

J

And how many would sir like

 

[bowji john]

I’ll measure up and let you know

Probably about 4 for the moment

That will cover the most commonly used

J

 

[Lateral]

I’ll measure up and let you know

Probably about 4 for the moment

That will cover the most commonly used

J

It was tongue in cheek, but you know where I am

 

[Zetter]

Just a quick bump for a great product. I purchased 3 for one of cabinets that I was not happy with the foam inserts on and they are spot on in construction and use the guns are a lot more secure now and I don't have scope clashing issue I did have as I can position the holders where I like. . Mark could not have been more helpful contacting me back after the initial order to check sizes for the shotgun. I will definitely be ordering another couple when I get the next cabinet installed.
This is certainly a step up from the foam inserts found in most gun cabinets that either are too shallow for scoped rifles or seem to come away from the back after a while when the adhesive goes.

 

[Lateral]

Still playing with the different ways they can be used.

I like this. It works with the DPT, which are my mod's of choice, although whilst they can't fall out, I'd like to see if I can improve the way it holds the reduced diameter a little better, but want to keep it max height of the "cup, & ring" to 20mm, so it can be posted large letter

What are peoples thoughts on fitting the rings, all parts supplied ?

 

[hairlesshunter]

Still playing with the different ways they can be used.

I like this. It works with the DPT, which are my mod's of choice, although whilst they can't fall out, I'd like to see if I can improve the way it holds the reduced diameter a little better, but want to keep it max height of the "cup, & ring" to 20mm, so it can be posted large letter

What are peoples thoughts on fitting the rings, all parts supplied ?


View attachment 457778

I used Velcro the fluffy bit but get it in the right place as it sticks like to a shovel

 

[Lateral]

I used Velcro the fluffy bit but get it in the right place as it sticks like to a shovel

It's certainly an option, but not my preference, I'll be sticking with magnets (no pun intended !)

It's not the cheapest option, but easy to move, & no residual mess if you change your mind, or need to rearrange.

 

[hairlesshunter]

It's certainly an option, but not my preference, I'll be sticking with magnets (no pun intended !)

It's not the cheapest option, but easy to move, & no residual mess if you change your mind, or need to rearrange.

Sorry I thought it was to reduce the inside diameter a tad for the Velcro
To fit to the cabinet I used female rubber coated magnets

 

[JackDavis]

John,

You asked, I listened

There are only so many ways to hold a moderator, and this modular design allows me to swap parts around to suit. It also means, that assuming people don't mind some very simple assembly, it will be cheaper to post, getting it within the 25mm large letter format.

I didn't like the first couple of test prints, but think I have it right now. Just need to make a couple of adjustments to the design, and I'll be ready to offer them.

At the moment, I'm using two 25mm diameter magnets, that are in line with the two rings, and are bolted in place, through the back, & and rings. The back is recessed for the rings to sit into, for better strength.

It will take a little time for me to work out the most popular sizes, but 45mm & 50mm seems to cover many, but I can make to any size, mostly !

Thoughts ?

Mark



View attachment 457734View attachment 457735View attachment 457736

How much?

 

[Lateral]

Sorry I thought it was to reduce the inside diameter a tad for the Velcro
To fit to the cabinet I used female rubber coated magnets

Misunderstood. Good idea if it's a bit loose.

 

[Lateral]

How much?

Jack,

I'm just finalizing which magnets to use, and doing a few tweaks, and I'll start a new thread tomorrow with pricing.

Out of curiosity, What moderator, and what is the length & diameter, as I only have DPT to go on ???


Mark