Scope mount suggestions

[Crowsfeet]

k peeps, I need some suggestions for new 30mm mounts. The attached picture is where my scope needs to sit to get the correct eye relief which, on this scope, is only 45mm. They need to be high too or the objective lens hits the rail and it's still not far enough back

 

[Klenchblaize]

Is it possible to reverse the rail?

K

 

[Crowsfeet]

Is it possible to reverse the rail?

K

No, have looked at that but the holes are different. It would be over the bolt knob then too.

 

[TimWest308]

Definitely teir one

 

[Oracle]

Reach forward/backward mount.

 

[Cyres]

One piece mount eg for Photon or ATN. Sportsmatch make a reach forward mount which you reverse. V good had a set on my Annie 25+ yrs. Vortex do similar.
Cheapest way is to buy an extended rail from ANT Supplies. You might then be able to use low rings.
Alternatively buy a dedicated rear extended rail for your rifle.
D

 

[wheelie]

This is my solution on my Pard.

 

[Crowsfeet]

This is my solution on my Pard.

Looks perfect. What brand please.

 

[wheelie]

Sports match

 

[wytonpjs]

https://www.ebay.co.uk/itm/185351349382?_skw=atn+scope+mount&itmmeta=01KEM9D985XZVE930R7YA73HAF&hash=item2b27cd2486:gPcAAOSweElh79Py&itmprp=enc:AQAKAAAA8FkggFvd1GGDu0w3yXCmi1dAd6keiF08LLC3Cj+lWA7C6BzjwtVzl+ItIg19fzaX9ZfWfCoiooYtD9EbocIhiwl7EDj3xQqG44RW8CbfaNtGfBkFkoy/6lEScSlX5bk/6lOtxfHalyJp2GBa617DIGt0YGmoUY09+BjXaLoO6Epxf6mEM1Ftn1mvFCeSlzvaKwPokBur8hWjOc84o0DJBwijV8e4av0TdBMn6PVdx0UEPOqnrW1dbTiSVXn8rKiNULsByxCFQt5t9NyEk81mUfEoP2ai6XaiyRd6zm6qJf2Gm4Z6FZnSA8Vz/8qgeU0ftA==|tkp:Bk9SR7qUtYn1Zg

 

[bob_lee_swagger]

A cantilever scope mount backwards would work fine

 

[dggowdy]

Look at step back mounts or rail.

 

[Taff]

Cheapest set of AR mounts you can find, probably from a airsoft shop.

 

[takbok]

A custom rail that extends further back is a good idea. You could get a rail made to suit some optilock bases.

I've got my receiver tapped so that I can mount a rail directly.

 

[Klenchblaize]

No, have looked at that but the holes are different. It would be over the bolt knob then too.

OK but bolt lift on your Sako would not be impaired by the overhang.

K

 

[The Optimist]

If you look at my avatar here (click to enlarge the photo) you will see a Sako 85 Stainless Steel Varmint with a S&B PMii 3-20 x 50 mounted using Tier One Rings and Tier One dovetail mounts. A perfect fit and never moved, loosened or lost zero. Okay - a 34mm tube, but I would look at what they have.