Wanted: Remington 22 Hornet brass, new, fired or damaged.

[greencurly]

Hi,
I need the Remington brass for case capacity. I am not concerned with neck/shoulder damage as the cases are for a wildcat and will be shortened.
James

 

[welshwarrior]

I’ve probably got 50 if that’s any use.

 

[greencurly]

Hi,
50 would be great. How much would you like for them including the postage?
James

 

[greencurly]

I’ve probably got 50 if that’s any use.

Very interested.

 

[welshwarrior]

Drop me a pm I’ll look out what I’ve got.

 

[25 Sharps]

Hi,
I need the Remington brass for case capacity. I am not concerned with neck/shoulder damage as the cases are for a wildcat and will be shortened.
James

Have 1-200 Remington that have been fire formed to k-hornet if you’re still looking?

 

[greencurly]

Hi,
Yes I am still looking. You can contact me directly on james@meadowgame.com
James

 

[greencurly]

Still looking.

 

[Scottb123]

Intrigued on what’s being wildcated 20 hornet ?

 

[greencurly]

Hi Scott,
I am wildcating a .17 Squirrel.
James

 

[M41b]

I’ve got a load that have been necked down to 17 Hornet if they’re any good to you?

 

[greencurly]

I’ve got a load that have been necked down to 17 Hornet if they’re any good to you?

If they are Remington brass they will be ideal if so, let me know what you want for them.
James

 

[foxpro]

I’ve about 200 all mixed if you pay the post you can have them for nothing

 

[greencurly]

I don't mind paying for the postage if there are a fair prcentage of Remington cases. All the others will be scrap to me.

 

[M41b]

If they are Remington brass they will be ideal if so, let me know what you want for them.
James

Hi, I’ll check when i get home later. Don’t want anything for them, just cover the postage
Cheers

 

[Bowland blades]

Henry Kanks import PPU and normally have loads in stock . Its OK stuff in the Hornet and i must have tried them all . Dont be put off at the cheap prices .

 

[greencurly]

Henry Kanks import PPU and normally have loads in stock . Its OK stuff in the Hornet and i must have tried them all . Dont be put off at the cheap prices .

I have tried some PPU, unfortunatelly they don't have the case capacity of Remington.

 

[Bowland blades]

I have tried some PPU, unfortunatelly they don't have the case capacity of Remington.

Honestly speaking , that's internet babble 99.9 piffle . Fill you case with LilGun , scrape the top off level and stick the pill in will work DONT DO THIS WITH OTHER POWDERS but thats what all our .22 hornet Guys do . Haven't weighed lil gun in the Hornet for many years ( it makes very little point ) . I shot and chrono graphed silly low fills to fully compressed ( really low fills where terrible regards consistency of velocity though ) So no need to mess .
I DONT RECOMEND REPEATING THIS LOW FILL EXERSIZE though Because there has to be some chance of a flash over , though i never found that out the hard way ( flash over can be dangerous ) I USED a CZ Hornet you just might get different outcomes , found out how it works and then stopped , No point and no gain

 

[greencurly]

Not sure that I would chance that with a .17 Squirrel the max pressure is listed at 46412, the case filled with Lilgun would be over 99000!

 

[Bowland blades]

Not sure that I would chance that with a .17 Squirrel the max pressure is listed at 46412, the case filled with Lilgun would be over 99000!

we are talking 22 hornet though