Recent content by Bell308

Welcome to the site. Bell308

from airgun BBS Webley Lazadome are a JSB Exact/AA Field variant and have much the same characteristics. A weight around 8.5grains (.177) 15.9 grains (.22) and a BC around 0.022 (.177), 0.032 (.22). Webley Lazapell are a H&N FTT variant and have a weight around 8.7grains (.177) 14.8grains (.22)...

Unfortunately, Steve Pope (the son of Venom co-founder Dave Pope) passed away a few years ago. The remaining stock of Steve's V-Mac kits and parts for the HW's were obtained by Lyndon Lewington (of ARC Tuning), who continues to be the primary point of contact for original V-Mach stock and has...

I got one from these gents in the States a while back? https://www.gunsprings.com/MAUSER/1898/cID2/mID40/dID175

http://www.reevemetalfinishing.co.uk/services.html this company will do individual parts as ive used them before.

please add me to the list for a large, just tryed to order one online...

Could try XCP Rust Blocker CLEAR COAT works for me on long term storage and the BMW GS etc... dont forget to patch it out before use this stuff is thicker than you think.

please note the parts diagram lists the length and size as standard off the shelf items not the fine pitch equivilent, however beware these usually end up in the fine pitch size...

if its a bedding bolt its most likly a M6x0.75mm pitch (M6fine) you could try the non standard socket screw company in birmingham but you might have to by a box....https://www.nssocketscrews.com/

Depends largly on personal build etc ie the height from your cheak bone to the Center of the eye, this should be comfortable on the stock for you. the set up looks fine unless your looking at a point above the centerline of the scope when your heads on the stock with a resonable check weld etc...

We have one of these above the firing point feed by a propane gas bottle etc works very well to heat the club room / firing point. https://spaceray.com/rsca-series/

any update / comments etc?

The angle your trying to work out equates to the following: @100m the hight from cross hair to post is 72.5cm (or 28.525 inches) a bit of basic trig using 25.416mm to the inch and 100 yards being 91.40m gives a distance from cross hair of 66.3cm (or 24.90 inches) usuning 1.047 inch as true min...

Welcome Rich, Halesowen.

https://toms-targets.uk/