Recent content by croslanda

I've had both knees replaced, the first fortnight after replacement is hard work, you must do your exercises, it's no good if you can't bend it, you need 90°at a minimum. After that it gets steadily easier but it takes approx 9 months before you forget about it. Mine have been marvellous you...

No signs of pressure, load is slightly compressed, 101%, I use quickload as well, velocity was a surprise as it forecasted 3800. Only burning g 98.8% in a 26" barrel with a forecast pressure of 55, 000psi. Velocity measured over 10 shots with a magnetospeed v3.

RC 3" 18gr are roll turnover.

I use RS52 with 39gr Blitzkings in a 26" 1:10 barrel and get 4050fps and 0.25 moa.

Sent you pm.

Aaron Wheeler in Brighouse, but be patient.

As far as I can remember elite optical the importers have a site where you can buy spares.

Have lost a few, buy a couple when available and superglue one on and keep t'other as a spare, it's the only way I've managed to retain one more than a single session if you keep it in your jacket pocket. I did manage to modify one off a falcon but that fell off eventually. It does help to put...

Am very interested, pm'd you

Mine does 3069 fps @ 10°C out of a 26" barrel using a 212gr bullet with a lot of RS76 powder confirmed by magnetospeed v3 chrono if that helps, definitely HME.

110 gr Hornady ELDX, but mine has 1:9 twist 26" barrel using RS70. Very accurate and fast.

Try RS52, I get north of 4000 fps with Sierra 39 gr bkings using a 26" Bartlein barrel with 1:10 twist on a Tikka T3 varmint action and same hole accuracy.

I use RS70 and achieve 3500 fps and .25 moa with 100gr TSX, but bear in mind my rifle has a 1:9 twist and a 26" brux barrel.

I've PM'd you

I've used an Intellidropper for a few years now and I can confirm that that they are problematic, at least mine is. Mine did what yours has done once, and in my case it was when I screwed the calibration process up and it started throwing random weights out, I switched off and started again and...