Wanted: Any 3D printer guys out there?
- Thread starter Sakoodin1
- Start date
I can help if you haven't found anyone.
I and every other pro user needs a cover/protector made for the pro lrf on the new hik. If not you will at some point end up with this. I think if you look at the lrf it needs to slide on from the barrel end and clip into position and have a 10mm bell shap at the front to protect the glass and keep the lrf pinging without interference?? Thoughts welcome
Attachments
That’s not good… very poor design & clearly not been tested in a real world environment?!
Exactly my thoughts!! I would love to know who tests these units for them before release ?? Obviously not lads that need kit to be robust and reliable. And it’s wasn’t abused before people start!! I look after my kit but it needs to withstand work.
Let us know when you’ve broken the throw lever off next
Will do
Here you go mate,it narrows down at the back so I measured that to. I think it needs to flare out at the front slightly and have say 10mm sticking out to protect it? Just my thoughts though
Attachments
Thanks that's perfect, yes makes total sense re extended bit for protection.
I've been making 3d printed protectors for expensive subsea cameras recently - same issues
.
Give me a couple days tops and I'll make something.
I've been making 3d printed protectors for expensive subsea cameras recently - same issues
.Give me a couple days tops and I'll make something.
Thanks very muchThanks that's perfect, yes makes total sense re extended bit for protection.
I've been making 3d printed protectors for expensive subsea cameras recently - same issues
Give me a couple days tops and I'll make something.
Similar threads
