2506 copper vhit load data help

8740

Well-Known Member
Hi.Does anyone have any load data for barnes 100 grain ttsx possibly with viht n165 for a 2506 please.
Nige
 
Barnes 100 gr TTSX
Viht N165 59.5 gr
50 thou off the LANS
Works for me in a TikkaT3
Shot a large Fallow Buck last evening about 120mtrs clean perfect entry, Heart shot about 25mm exit. Ran in a small circle and dropped.
Hope this helps.
Steve.
 
Just checked on "quick load" and 59.5 is pretty much the max, as usual start lower and work up. You may find its too fast and does too much damage but I find it OK.
 
I run 80grn very accurate and great for roe. I can’t get the 100grn to group for love nor money, so following with interest. Only tried n160 so far, which has worked well with all other bullets
 
Not N165
But here's what im using

Barnes 101LRX seated 75 thou off lans
51.5grn N160
Gives 3302fps avg 2445 ft/ lbs

Paul
 
I run 80grn very accurate and great for roe. I can’t get the 100grn to group for love nor money, so following with interest. Only tried n160 so far, which has worked well with all other bullets
Hi RL84.
I have some of the Barnes 80 grain TTSX to try in my 25-06. May i ask what velocities you are achieving?

I see Barnes are predicting up to 3800fps from a 24" barrel.

I too have N160 and some N165, although i suspect the 165 may be a little slow.
 
Sorry to be a pain,but i went to collect the powder today but had to make do with n560 so my question now is does anyone have a load for n560 please.
Nige
 
Sorry to be a pain,but i went to collect the powder today but had to make do with n560 so my question now is does anyone have a load for n560 please.
Nige
I have not used N560 but Quick Load are almost the same as N160 giving a max safe load of 60 grain. Again work up to it and keep check for pressure signs.
It is showing a speed of over 3300fps which is pretty fast and probably do more than wanted damage to deer.
Have fun with your new found hobby.
Steve.
 
Thanks for your reply Steve.much appreciated constructive reply,will let you know. Thanks.
Nige
 
Did you find a load in the end? Im about to run out of H4350 and will be looking for a new powder, 85g nosler spritzers.
 
Back
Top