.270 Viht N160 for sierra 130 GR SBT

Norriemac25

Member
Hy all is there anyone reloading using Sierra 130 GR SBT heads using Viht N160 powder, what are load are you getting your best results from.
 
yes exactly that N160 + 130 GR sierra pro hunter.
My load as follows
57.5 Grn N160
Magnum primer
Norma brass
COCL 3.233"
Velocity 3100 fps
No responsibility accepted if you copied my load data.
 
Bullets @Norriemac25 not Heads, the head contains the primer.
Does your reloading manual call bullets heads are are you just making up names for things ?
Bullets can be called heads if they self identify as such, biological sex doesn’t apply so get over it or be cancelled by the woke brigade.
 
Came for reloading advice, got some free pedantry.

My advice is not to call a Bullet a Head.

Projectile works, although, to be pedantic, (IMO) it's only a projectile when its been projected out of the barrel ie 'in flight'.
A brick is a projectile when it's thrown at something, so is a plate and an egg ... but a bullet is a bullet.

As far as reloading advice, thats a whole new ball game.
It's complex.
There are a whole lot of factors that determine what is a 'safe' load and what is dangerous.
VihtaVuori publish a list of load data but even these should not be taken as 'safe' for your rifle.


Always start below (or at the minimum) and work up to an load that meets your requirements for accuracy and (above all) safety.
You reloading manual will give you loads of advice regarding how to spot when a load is approaching max pressure.

Measure the case capacity and set a COAL that suits your chambering.
Seat the bullet accurately and consistently.
Then experiment with powder wieghts.
 
Back
Top