6.5 creed starline brass

[aquarius11]

As above are they any good?

 

[splash]

I use starline brass in 32-20 nothing wrong with it, and id use it in any other caliber I’ve got without doubt

 

[Bosbuck]

I use starline 6.5cm srp. Reloaded 5 times and all is good.

 

[phaedra]

I have a lot of Starline 6.5 Creedmoor small primer brass, annealed after every 4 firings, so far used 12 times, still got a 0.28" 5 shot group in the tunnel range on Tuesday with it

I also have their large primer version, same quality, not sure how long the primer pockets will last. It's not a Starline problem, it's a known issue with other large primer versions of the case due to the pressure.

 

[Scapegoat]

I use it to reload 6.5CM, large primer. Great so far.

 

[Rusty Gate]

I use the LR. Run through a Sinclair neck sizer (to get uniform tension). Been real good & justvordered more.

 

[markha]

I had a few loose primer pockets after the first reload.

 

[johndeere]

I had a few loose primer pockets after the first reload.

LRP?

 

[paul o']

Yup its all i used in the CM (LRP ) apart from the 100ish Factory hornady still sitting under the bench and a few S&B that I run the rifle in with , also I never had any problems with primers falling out and I was running stiff reloads for long range target.
I run them neck turned and sized with a collet LE Wilson FL die .

 

[Fox Red]

I'm using Starline in the 6.5 Creed - the LRP variety. Only loaded twice so far, but so far so good. Early days for me with the Creed so don't quite know what to expect yet.

I'm running 44gr of RS62. Haven't been able to check over the chrono. Still experimenting with OAL at the mo. I'll get out again on the next dry day hopefully!