Wanted: 6.5 PRC bits

[hendrix's rifle]

Before I buy new I'm after a couple of bits if anyone is thinking of selling:

Dies + shell holder
Trimmer
Cases or a plug for cases would be great

Also either eld-x or eld-m (140's) if someone has any going begging...

Cheers

 

[DavyG]

Have you tried 147’s…?

 

[hendrix's rifle]

Have you tried 147’s…?

I've not, what sort of speeds are you driving them at? I'm looking for initial velocity over slightly higher BC

 

[DavyG]

I've not, what sort of speeds are you driving them at? I'm looking for initial velocity over slightly higher BC

52.9gr of N165 @ 2820fps.

 

[DavyG]

Before I buy new I'm after a couple of bits if anyone is thinking of selling:

Dies + shell holder
Trimmer
Cases or a plug for cases would be great

Also either eld-x or eld-m (140's) if someone has any going begging...

Cheers

Dauntsey Guns had a load in stock when I called in last week.
DG

 

[finnbear270]

Load of once fired Hornady ex - 143g ELDX cases here if you want them.

 

[Twodogs]

Slight aside, if ever considering copper try YewTree 114grain TLR. Over 55 grains of N165 achieving 3200 fps.

 

[hendrix's rifle]

Slight aside, if ever considering copper try YewTree 114grain TLR. Over 55 grains of N165 achieving 3200 fps.

I'm planning on using them along with lead for the time being. They worked a treat out of my creedmoor

 

[gaza916]

147 ELDMs through my sporter barrel at 3000FPs using RS70

 

[finnbear270]

35 x Hornady fl sized & primed ready to load & 31 once fired need processing.
32 x Primed ready to load ADG too ....enough bits to get you going / trialling, I can't reload for mine better than the Hornady factory stuff, It's mega accurate.
FOC.

 

[hendrix's rifle]

35 x Hornady fl sized & primed ready to load & 31 once fired need processing.
32 x Primed ready to load ADG too ....enough bits to get you going / trialling, I can't reload for mine better than the Hornady factory stuff, It's mega accurate.
FOC.

Cheers, I'll drop you a message in the morning

 

[Selous]

Before I buy new I'm after a couple of bits if anyone is thinking of selling:

Dies + shell holder
Trimmer
Cases or a plug for cases would be great

Also either eld-x or eld-m (140's) if someone has any going begging...

Cheers

Just saw this thread over on UKV in case you aren’t sorted

6.5 PRC DIES

Forsale 1 forster Bushing bump neck sizing die BNIB 1 Redding f/l sizing die Brand New never used £140 For both posted

ukvarminting.com