Wanted: Accuracy International L96 or PM bits

[truser00]

Hi,

Does anyone have any bits from an L96 or an Accuracy International PM that they might be able to part with to help me fill my transit case please?

Duplicate bits are most welcome.

Thanks in advance.

 

[sniper3]

I have a L96 mag somewhere if you’re interested.

 

[truser00]

I have a L96 mag somewhere if you’re interested.

Thanks, how much? Does it have wings on the bottom or fell length shelf thing? I could take another.

 

[sniper3]

I have finally found them! There is the L96 mag still in its wrappings then there is the scope mount and muzzle brake and finally rear sight.
The mag I’m looking for £250 including tracked postage.
Ajay

 

[truser00]

I have finally found them! There is the L96 mag still in its wrappings then there is the scope mount and muzzle brake and finally rear sight.
The mag I’m looking for £250 including tracked postage.
Ajay

What do you want for the lot excluding the magazine? Used ones are £45 so will pass on that unfortunately. Also looks to say £70 or something under the black sharpie!

 

[sniper3]

What do you want for the lot excluding the magazine? Used ones are £45 so will pass on that unfortunately. Also looks to say £70 or something under the black sharpie!

That was aw magazine in the bag, I used it for safe keeping.

 

[Ronin]

I’ve a round type hand stop that mounts and locks into the lower longitudinal slot of the AW forend

May be newer than what you are looking for

It is the earlier type hand stop (simple cylinder that locks when screwed closed)

Not the later moulded plastic type

 

[Mr Roberts]

Have a look on sporting services website site they can get most if you can't find it here, their mags are around the £90 mark new.

 

[truser00]

I’ve a round type hand stop that mounts and locks into the lower longitudinal slot of the AW forend

May be newer than what you are looking for

It is the earlier type hand stop (simple cylinder that locks when screwed closed)

Not the later moulded plastic type

Thanks Ronin, I'll have a think but I might already be sorted for that. I only have enough parts to build one clone chassis and I already have a handstop at the moment.

 

[truser00]

Have a look on sporting services website site they can get most if you can't find it here, their mags are around the £90 mark new.

They have very few bits for pre-AW rifles. I've already got what I can from them, but prices are also quite dear.

 

[Ronin]

Thanks Ronin, I'll have a think but I might already be sorted for that. I only have enough parts to build one clone chassis and I already have a handstop at the moment.

I also have a aw chassis with skins if that’s of interest

 

[truser00]

I also have a aw chassis with skins if that’s of interest

Interesting! I’ll PM you with my email for some photos if that’s ok.

 

[Muntybuck5803]

Got a 26mm AI mount here I’d sell.

 

[Tbrush]

There are some older L96 era parts on eBay at present

 

[truser00]

Bump. Still looking.

Does anyone happen to have a bare L96 chassis or plastic stocksides by any chance? Some were floating about on militaria shops a few years ago.

 

[.22-250x]

I know of a schmitt and bender- accuracy international mk 11 scope, 3 - 12 mag, was originally made for the AE model I believe that may be for sale if you're interested

 

[truser00]

I know of a schmitt and bender- accuracy international mk 11 scope, 3 - 12 mag, was originally made for the AE model I believe that may be for sale if you're interested

That sounds interesting! I will PM you.

 

[topscots1]

I have a 34 mm scope mount from the L96 during the 3-12 PM2 period.

 

[Saracen666]

Hi,

Does anyone have any bits from an L96 or an Accuracy International PM that they might be able to part with to help me fill my transit case please?

Duplicate bits are most welcome.

Thanks in advance.

Parker Hale Bipod, with spigot, of any use?

 

[truser00]

Parker Hale Bipod, with spigot, of any use?

Thank you, but not for me.