Alpex pro mount issue

[millsy9201]

Have any Blaser/sauer owners had any issues with putting the alpex pro into the saddle mount, it won’t sit properly mine due to a raised part on the bottom of the tube.
If anyone has experienced this and changed the rings can you recommend which size to buy, tier one have several options but I’m not sure which ones will fit.

Cheers folks

 

[bobbroom]

I had exactly same issue and called Braces of Bristol (gun room) and they supplied Blaser 4mm riser blocks that fit directly under the rings to provide sufficient clearance for the Alpex 4k, cost was around £42

 

[SCC]

I had to fit the riser blocks too. My 4k never needed them, so the base of the pro must be slightly deeper.

 

[millsy9201]

Thank you so much gents I’ll contact braces tomorrow