another Arken Zulu mount ( QR based)

[sauer]

Hi folks

Another query regarding Arken Zulu mount

I have the long 0moa mount and I was looking at the 3x Allen key headed screws that grip mount to the picatinny rail and got me thinking ….
Can these Allen key screws be changed out for some kind of hand operated wing nuts or levers to make mount more QR based so no tools needed if moving it between rifles


Paul

 

[tozzybum]

Evil Ebay is your friend Paul 3mm to 12mm available atb Iain

 

[mealiejimmy]

The screws used in the Zulus mount are standard M4

Cheers

Bruce

 

[sauer]

Would be easier for swapping but look like a pair of plastic tits on the Mona Lisa ….
Hopefully someone comes up with a no tool QR type mount for them …
Can’t remember type I seen before just had a small lever and locked in …off or on in seconds

Paul

 

[mealiejimmy]

Evil Ebay is your friend Paul 3mm to 12mm available atb Iain

These would be nicer https://www.amazon.co.uk/PrecisionG...27948&sprefix=M4+thuimbscrews,aps,281&sr=8-16

Cheers

Bruce

 

[tozzybum]

These any better Paul from Amazon ,4mm easy release?

 

[kenbro]

Hi,
Some time ago I bought some plastics wing nuts to replace the Allen screws.
I fitted them one evening and the next day, using the same (Guessing) pressure I was able to tighten them a little bit more.
One day later I tried again and again got slight movement.
I’m sure the is more than one reason for this but whatever it is I’ve replace the original screws.
Free issue if anyone wants some to try.
Ken.

 

[fvans]

Looking for something similar and found this:

GN 302.1 (d1 - l2) | Adjustable handles | Elesa

Adjustable handles, threaded screw GN 302.1 (d1 - l2) Elesa. View all the technical features, download the CAD drawings or ask for a quotation.

www.elesa.com

 

[ShootyBang]

It seems one now exists! Tier One Universal Picatinny Base Mount for the Arken / DNT Zulus

 

[FISH BOY]

Innomount for the Pard NV008s also fits I believe.

 

[Bandooki]

Innomount for the Pard NV008s also fits I believe.

Not quite but very close, i had mine milled on a pillar drill by a friend, I believe it was just over 1mm widened to ensure a snug fit for the Zulus

 

[FISH BOY]

Not quite but very close, i had mine milled on a pillar drill by a friend, I believe it was just over 1mm widened to ensure a snug fit for the Zulus

Believe you had the Innomount for a Pard NV008P just like me. Like you say roughly 1mm too narrow.

Saw your milling job on it - Tim 243 very kindly did the same job for me.

Pard S models rails are 1mm wider with the Innomount made to fit (also fit the DNT Thermnight range).

 

[Bandooki]

Nice job once done