Wanted: Any 3D printer guys out there?

[Sakoodin1]

I’m looking further someone that does 3D printing? If you can help me ping me a message thanks

 

[slider]

@Lateral

 

[foxinmad]

@takbok

 

[takbok]

I’m looking further someone that does 3D printing? If you can help me ping me a message thanks

I can help if you haven't found anyone.

 

[Sakoodin1]

I and every other pro user needs a cover/protector made for the pro lrf on the new hik. If not you will at some point end up with this. I think if you look at the lrf it needs to slide on from the barrel end and clip into position and have a 10mm bell shap at the front to protect the glass and keep the lrf pinging without interference?? Thoughts welcome

 

[Donkey Basher]

I and every other pro user needs a cover/protector made for the pro lrf on the new hik. If not you will at some point end up with this. I think if you look at the lrf it needs to slide on from the barrel end and clip into position and have a 10mm bell shap at the front to protect the glass and keep the lrf pinging without interference?? Thoughts welcome

That’s not good… very poor design & clearly not been tested in a real world environment?!

 

[Sakoodin1]

That’s not good… very poor design & clearly not been tested in a real world environment?!

Exactly my thoughts!! I would love to know who tests these units for them before release ?? Obviously not lads that need kit to be robust and reliable. And it’s wasn’t abused before people start!! I look after my kit but it needs to withstand work.

 

[Donkey Basher]

Exactly my thoughts!! I would love to know who tests these units for them before release ?? Obviously not lads that need kit to be robust and reliable. And it’s wasn’t abused before people start!! I look after my kit but it needs to withstand work.

Let us know when you’ve broken the throw lever off next

 

[takbok]

@Sakoodin1 can you measure these 3 dimensions and I will try to make a simple cover.

 

[Sakoodin1]

@Sakoodin1 can you measure these 3 dimensions and I will try to make a simple cover.
View attachment 472857 View attachment 472858

Will do

 

[Sakoodin1]

@Sakoodin1 can you measure these 3 dimensions and I will try to make a simple cover.
View attachment 472857 View attachment 472858

Here you go mate,it narrows down at the back so I measured that to. I think it needs to flare out at the front slightly and have say 10mm sticking out to protect it? Just my thoughts though

 

[takbok]

Thanks that's perfect, yes makes total sense re extended bit for protection.

I've been making 3d printed protectors for expensive subsea cameras recently - same issues .

Give me a couple days tops and I'll make something.

 

[Sakoodin1]

Thanks that's perfect, yes makes total sense re extended bit for protection.

I've been making 3d printed protectors for expensive subsea cameras recently - same issues .

Give me a couple days tops and I'll make something.

Thanks very much

 

[takbok]

I love a bit of product design!

@Sakoodin1 first one in 'creedmoor camo' came out quite nicely. Please send me your postage details and I'll get it to you to test.

I have other neon colours and also clear rubber. I will try to get hold of some black filament going forward as the black I have is a bit too hard for this I think.

 

[Sakoodin1]

I love a bit of product design!

@Sakoodin1 first one in 'creedmoor camo' came out quite nicely. Please send me your postage details and I'll get it to you to test.

I have other neon colours and also clear rubber. I will try to get hold of some black filament going forward as the black I have is a bit too hard for this I think.

View attachment 473018 View attachment 473019 View attachment 473020 View attachment 473021

The shape looks bob on!! Colour is negligible but if it saves a cracked lrf screen then so be itbloody amazing what can be done mind well done

 

[Daisymay]

You can have as many as you like, as long as there PINK

 

[Freeforester]

You can have as many as you like, as long as there PINK

That’ll be “Pro” for professional, nae prosthetic, Pink…