I’ve got a thermal spotter but unfortunately a thermal scope is beyond my means.Don't know about UK boar but here (Sweden) where they been shot at for 10-15 years they tend to be very suspicious about IR lamps. Boar are good learners. When they are closing in at a feeding station they are extra careful, naturally, and if lamp is lit they tend to ship that evening meal.
Both 850 and 940 are visiable to some extent especially when light is right on. In the fields it is easier as they move all the time but at feeding stations tricky.
Best solution is to have some kind of green light at the feeder and then, we they are busy eating, switch on the IR pointing well above the boar and then move gun downwards and take the shot directly.
A better solution is spotting with a termo device and thereby be fully invisable and be able to see when they calmed down and then use the IR scope/gun.
With IR it is easy to see when a boar sees you (or the lamp). When there is glare in the display from their eys then they are looking at the lamp. However, often there are a few seconds before they disappear into the darkness and sometimes one can then take a shot but then you don't see bullet reaction.
With boar thermal scope is superior.
I've a green spotlight up on my boar feeder. It runs of a car battery and has a solar panel that will keep it charged spring through to Autumn. The spot light turns on and off by a light sensor. The boar take no notice of the green light and its light intensity can be adjusted by a remote control. I have it on a low setting and just increase the brightness when the boar turn up. The spotlight gives plenty of light to shoot boar by so no thermal is needed.Don't know about UK boar but here (Sweden) where they been shot at for 10-15 years they tend to be very suspicious about IR lamps. Boar are good learners. When they are closing in at a feeding station they are extra careful, naturally, and if lamp is lit they tend to ship that evening meal.
Both 850 and 940 are visiable to some extent especially when light is right on. In the fields it is easier as they move all the time but at feeding stations tricky.
Best solution is to have some kind of green light at the feeder and then, we they are busy eating, switch on the IR pointing well above the boar and then move gun downwards and take the shot directly.
A better solution is spotting with a termo device and thereby be fully invisable and be able to see when they calmed down and then use the IR scope/gun.
With IR it is easy to see when a boar sees you (or the lamp). When there is glare in the display from their eys then they are looking at the lamp. However, often there are a few seconds before they disappear into the darkness and sometimes one can then take a shot but then you don't see bullet reaction.
With boar thermal scope is superior.