Tough decision but life has changed in the last year and I’ve had to admit that I’m just not going to be able to put the time into being able to compete in PRL at least for the next couple of years.
I will quite happily keep them to shoot (and maybe compete in a few years) , but they deserve to go to someone who will use them what they were designed for really.
Please note that the prices do not include the scope and mounts (Matching Athlon Ares ETR and Burris signature mounts) but they could be included by negotiation.
far more accurate than I
(yellow bits are 3d printed thumb rests which are just held on with double sided tape)
6mm GT
I decided on this last summer after doing a lot of research on which 6mm and I have to say it hasn’t disappointed. The barrelled action was finally built by Alan at GTAC earlier this year after getting all the bits imported (slowly!)
I’ve settled on running the 109s over ramshot hunter at 2800fps but if you can get your hands on Varget then this is the powder it was built for. Good speeds, good barrel life and the feeding seems to be great from the AI mags which were recommended.
This has had 202 rounds down it so the brass is twice fired, except for the two cases I had to send to proof which are twice fired. I had ordered 500 but only 100 got imported (legally I hasten to add!)
You can get alpha brass from brownells (and possibly C2) BUT Lapua are producing brass later this year and I have two boxes already on order with my RFD (I am sure they would be happy to honour this order for the new owner but this would be at cost when it comes in)
The balance is just in front of the barricade stop, it needs about 1lb on the stock to balance it perfectly.
Includes the reamer to get more barrels made, should keep you in business for a while! (Not for sale separately)
Zermatt Origin
Brux 26” 1:7 heavy profile cut 5/8x24
MDT ACC premier chassis
Timney Calvin elite trigger
Tier one spitfire muzzle brake
2x AI 10 round metal mags
100x brass
Forster Bench Rest Ultra Micrometer Seater Die
L.E. Wilson Bushing Type Full Length Sizer Die and bushing
JGS 6mm GT Reamer and Go-Gauge (so you can get new barrels made up the same)
As above £4250
Or £5000 with 2300x Hornady 109 Eldm (bulk pack)
I will quite happily keep them to shoot (and maybe compete in a few years) , but they deserve to go to someone who will use them what they were designed for really.
Please note that the prices do not include the scope and mounts (Matching Athlon Ares ETR and Burris signature mounts) but they could be included by negotiation.
far more accurate than I
(yellow bits are 3d printed thumb rests which are just held on with double sided tape)
6mm GT
I decided on this last summer after doing a lot of research on which 6mm and I have to say it hasn’t disappointed. The barrelled action was finally built by Alan at GTAC earlier this year after getting all the bits imported (slowly!)
I’ve settled on running the 109s over ramshot hunter at 2800fps but if you can get your hands on Varget then this is the powder it was built for. Good speeds, good barrel life and the feeding seems to be great from the AI mags which were recommended.
This has had 202 rounds down it so the brass is twice fired, except for the two cases I had to send to proof which are twice fired. I had ordered 500 but only 100 got imported (legally I hasten to add!)
You can get alpha brass from brownells (and possibly C2) BUT Lapua are producing brass later this year and I have two boxes already on order with my RFD (I am sure they would be happy to honour this order for the new owner but this would be at cost when it comes in)
The balance is just in front of the barricade stop, it needs about 1lb on the stock to balance it perfectly.
Includes the reamer to get more barrels made, should keep you in business for a while! (Not for sale separately)
Zermatt Origin
Brux 26” 1:7 heavy profile cut 5/8x24
MDT ACC premier chassis
Timney Calvin elite trigger
Tier one spitfire muzzle brake
2x AI 10 round metal mags
100x brass
Forster Bench Rest Ultra Micrometer Seater Die
L.E. Wilson Bushing Type Full Length Sizer Die and bushing
JGS 6mm GT Reamer and Go-Gauge (so you can get new barrels made up the same)
As above £4250
Or £5000 with 2300x Hornady 109 Eldm (bulk pack)
Last edited:
