CZ 452 picatinny rail HELP

[pumbaa]

I'm after some advice,

Want to put at picatinny rail on my CZ 452 but am unsure which width of dovetail I have, and how/where to measure.

There doesn't seem to be a standard?

Its a 452-2E ZKM .17hmr

Any help/advice appreciated.

 

[Trickyd66]

Sure I will be corrected if wrong, but think all 452 hmr are 3/8"

 

[pumbaa]

Thank you for the prompt reply, that does seem the case : )

Anyone got a recommendation of a good rail?

 

[Trickyd66]

Thank you for the prompt reply, that does seem the case : )

Anyone got a recommendation of a good rail?

Double check by measuring... 13mm is 3/8"... 11mm is 11mm

 

[Trickyd66]

Thank you for the prompt reply, that does seem the case : )

Anyone got a recommendation of a good rail?

Do a search on here... lots of options on here in previous posts from budget to high end

 

[Sandy25]

Thank you for the prompt reply, that does seem the case : )

Anyone got a recommendation of a good rail?

I have an eagle vision pic rail on my cz 455 .22 - works very well and have had no issues, wasn't mega bucks either. Make sure you measure the total length of your dovetails first so that you know what length to get - don't ask how I know

Optics warehouse have a good range and always happy to help.

Sandy

 

[pumbaa]

Double check by measuring... 13mm is 3/8"... 11mm is 11mm

I've just measured the tops and they are 11mm, good job I checked

 

[pumbaa]

I have an eagle vision pic rail on my cz 455 .22 - works very well and have had no issues, wasn't mega bucks either. Make sure you measure the total length of your dovetails first so that you know what length to get - don't ask how I know

Optics warehouse have a good range and always happy to help.

Sandy

Thanks Sandy, I'll measure the length also

 

[pumbaa]

I have an eagle vision pic rail on my cz 455 .22 - works very well and have had no issues, wasn't mega bucks either. Make sure you measure the total length of your dovetails first so that you know what length to get - don't ask how I know

Optics warehouse have a good range and always happy to help.

Sandy

Sandy,

The eagle vision one looks good, do you find not having a cut out a issue with cases ejecting?

 

[Sandy25]

Sandy,

The eagle vision one looks good, do you find not having a cut out a issue with cases ejecting?

Nope - hasn't been an issue for me with the .22lr. I presume .17 will be similar with ejection as well

The only times I have had a stoppage is when I don't bring the bolt back far enough so the empty case sits above the mag well which is user error on my part

 

[fizzbangwhallop]

I’ve just managed to mount a Photon XT that ran out of downward elevation adjustment to an AirArms S510 using these sprung adapters,

Snap-In Weaver Scope Mounts Adapters - To Dovetail Base Rails

ant-supplies.uk

And a pair of the height adjustable rings having filed the groove ridges flat to allow them to pivot

AnTac Adjustable Height Weaver Picatinny Scope Mounts

ant-supplies.uk

I’ve also used the adapters to mount Par008’s and the Zulu/DNT’s to my Finnfire and the 510

Cheers

Fizz

 

[pete evans]

Sandy,

The eagle vision one looks good, do you find not having a cut out a issue with cases ejecting?

Yes, I replaced mine with a rail with cut out and it works well.

 

[pumbaa]

Thanks all for the help, I've ordered an eagle vision one.

If it doesn't eject properly, I'm blaming @Sandy25

 

[sauer]

Yes, I replaced mine with a rail with cut out and it works well.

where did you get one with a cut out ?

Paul

 

[Koenig]

I'm after some advice,

Want to put at picatinny rail on my CZ 452 but am unsure which width of dovetail I have, and how/where to measure.

There doesn't seem to be a standard?

Its a 452-2E ZKM .17hmr

Any help/advice appreciated.

I put a long post on about just this some years back if you have a search it’ll come up.

 

[pete evans]

where did you get one with a cut out ?

Paul

Britannia rail

 

[jedi]

Hi, I have bought a Hikmicro alpex 4k lite 40mm,for my bruno 22 rimfire which is 11mm dovetails. My problem is the eye relief is about 40mm short.Can anyone advise what mount I should purchase?