Double High Seat

[Thetownie]

Nice work.

 

[tozzybum]

well done tim wish my welding<bodging>was anywhere near yours .cracking piece of kit

 

[takbok]

Tim, after seeing your pictures of your highseat I decided to design one that's loosely based on it. I'm doing some fabrication drawings at the moment that could be shared with SD members. Is it 50x25x2.5 Rectangular hollow section that you're using for the main legs? Is the rest 25x25? Hope you don't mind me asking.

Cheers, Rory

 

[Tim.243]

Tim, after seeing your pictures of your highseat I decided to design one that's loosely based on it. I'm doing some fabrication drawings at the moment that could be shared with SD members. Is it 50x25x2.5 Rectangular hollow section that you're using for the main legs? Is the rest 25x25? Hope you don't mind me asking.

Cheers, Rory

The dims are right for the box....fill your boots as it is all there to see.

Tim.243

 

[takbok]

Thank you very much.

 

[takbok]

Almost there... needs some finishing touches then will create the drawings for everyone's perusal in a week or two.

 

[black lab]

Hi
Like your high seat!
And your 4 element Beam
Bill (MM0RIP)

 

[Terry2016]

Looks a proper piece of kit, plenty of space in that one ..

atb

Terry