Wanted: IR torch for Alpex 4k lrf

[Bigron321]

I’m having a nightmare with my IR mounting and torch.

I’ve got a Blackwood outdoors high adjustable mount. But the torch I’ve got a Wulf seems to bounce off everything and everywhere, unless it’s narrowed right in.

Does anyone have a laser IR torch that would pair well with the Alpex?

Thanks

 

[eds81]

Only one. The wraith by ludicrous lumins

 

[Colin G]

I use the wraith full fat version. Works the best for me

 

[Flash G 74]

Hello, If your using a N/V scope i just use a figure 8 clamp with my I/R torch

 

[Bigron321]

Sorry should say anyone got one to sell?

 

[Flash G 74]

Sorry should say anyone got one to sell?

Hello, Is it only laser or would a L E D do ? And do you want 940 or 850 ?

 

[Bigron321]

Hello, Is it only laser or would a L E D do ?

After laser I think

 

[Flash G 74]

After laser I think

Hello, What model Wolf torch do you have ??

 

[Bigron321]

Hello, What model Wolf torch do you have ??

Not entirely sure why?

 

[Flash G 74]

Not entirely sure why?

Hello, Seems strange you using a high adjustable mount and the as you said bounces off everything, But good when set to a narrow beam, What N/V scope are you using, I had this with my Photon a I/R Laser but perfect when using LED

 

[Bigron321]

Hello, Seems strange you using a high adjustable mount and the as you said bounces off everything, But good when set to a narrow beam, What N/V scope are you using, I had this with my Photon a I/R Laser but perfect when using LED

Hi flash,
As above it’s alpex 4k lrf.
The high mount seems to point the torch at the mod on my rifle and I can’t get it past it or over it.

 

[Tim.243]

Hi flash,
As above it’s alpex 4k lrf.
The high mount seems to point the torch at the mod on my rifle and I can’t get it past it or over it.

Srx on a high mount using a Alpex lrf mounted vertical

 

[Flash G 74]

Hi flash,
As above it’s alpex 4k lrf.
The high mount seems to point the torch at the mod on my rifle and I can’t get it past it or over it.

Hello, My friend has the Alpex A50 T and uses the torch that came with it and works well with no bounce

 

[Bigron321]

Has anyone got anything for sale?

 

[pinemartin]

i have a pbir never used believed to be a laser £85 posred

 

[blueeyes]

It wont matter what IR you use if you cant get it past the Moderator, try mounting it e IR in a different angle/place you can get off set mounts under barrel mounts etc etc Ants supplies do a lot of this type of stuff HTH

 

[Daisymay]

 

[Daisymay]

This might help.

 

[deerly departed]

You only need a spoot that fills the units eyepeice.
If that meanns a tighter spot then fine.
If it is bouncing off the mod, reposition.
Ultra high too rsise it or, piccy on side of stoock.
Undermount
Magnetic mount on barrel or mod though least favorite.
940nm more discrete but less range
Mine wpuld easoly hit 300 yds (LED)
850 longer but red glow some animals may be aware of.
Andy at Ludicrous Lumens can suggest options.
The mount and unit made by Hicmikro is fine.
I used a tri LED RED, 850 and 940 with remote on/off and dimmer.