Hodmedod.one
Well-Known Member
I bought this a few years ago. It has had very little use and has never done anything other than .243 WIN reloading, probably less than 500 rounds. Still in it's original box. Comes with 2 sets of instructions, large and small primer arms, a Lee primer pocket tool and a Lee case mouth chamfering tool.
When the thread reducing bush is removed, the press will accept Hornady lock n load system bushes.
The largest opening in the industry and the longest stroke-- handle is adjustable to provide the least travel of any press.
Rigid cast iron construction in a classic "O" design for maximum strength. Baked powder coating is durable and makes the Classic Cast a handsome addition to any reloading bench.
Adjustable handle is movable side to side for left or right hand operation. Start and stop position is adjustable with a 48-tooth ratchet type handle clamp. In addition, the handle length is completely adjustable. Shorten it when loading handgun and short rifle cases.
Automatic primer arm with bottom of stroke priming for best feel. Includes two primer arms for large and small primers. No more fumbling with tiny guides and springs.
The original Classic Cast designed to work with large series 1 1/4-12 dies. Includes threaded adapter to accept standard 7/8-14 dies.
Large 1 1/8 diameter ram drilled completely through to allow spent primer disposal direct to trash can with attached tube. Ram is two-piece to allow installation of the mammoth 50 BMG shell holder. All supported by over 12 square inches of ram bearing surface.
Accepts standard shell holders, ram insert can be rotated to allow primer installation on right or left side.
£150 posted.
.
When the thread reducing bush is removed, the press will accept Hornady lock n load system bushes.
The largest opening in the industry and the longest stroke-- handle is adjustable to provide the least travel of any press.
Rigid cast iron construction in a classic "O" design for maximum strength. Baked powder coating is durable and makes the Classic Cast a handsome addition to any reloading bench.
Adjustable handle is movable side to side for left or right hand operation. Start and stop position is adjustable with a 48-tooth ratchet type handle clamp. In addition, the handle length is completely adjustable. Shorten it when loading handgun and short rifle cases.
Automatic primer arm with bottom of stroke priming for best feel. Includes two primer arms for large and small primers. No more fumbling with tiny guides and springs.
The original Classic Cast designed to work with large series 1 1/4-12 dies. Includes threaded adapter to accept standard 7/8-14 dies.
Large 1 1/8 diameter ram drilled completely through to allow spent primer disposal direct to trash can with attached tube. Ram is two-piece to allow installation of the mammoth 50 BMG shell holder. All supported by over 12 square inches of ram bearing surface.
Accepts standard shell holders, ram insert can be rotated to allow primer installation on right or left side.
£150 posted.
.
