Leica HD-B 3000

[panicoll]

Good Afternoon Gents,

I have a pair the HD-B binoculars and then successfully downloaded from the Leica website the ballistic curve for one caliber I use.

The question I have is it possible to load more than one ballistic curve to the 8BG card supplied with the HD-B's as the hex file for an individual ballistic curve is only 1KB. If so where can I find out where to do this.

Many thanks

Paul

 

[Woodmister]

hi mate, i asked the same question for mine,

i dont think there is, so i just bought 2 sd cards and labelled tehm up with the caliber so i know.

hope this helps.

 

[panicoll]

hi mate, i asked the same question for mine,

i dont think there is, so i just bought 2 sd cards and labelled tehm up with the caliber so I know.

hope this helps.

Thanks, I had considered this but thought it would be excessive wear on the delicate cardholder inside the binoculars. I may have a look at the pre-loaded curves and see if there is something suitable to switch between.

BW

Paul

 

[Edinburgh Rifles]

no
Buy a few cards and load them up with the file for what you need
quick to swap them around and if you use a pair of plastic tweezers you should put no significant wear on the holder
it has a bit of flex in it anyway

I have one for my .22lr and one for my 300nm

 

[panicoll]

Smashing thanks for the info, Another card and a pair of plastic tweezers it is then.