LOAD FOR 22.250 USING SWISS RELOAD POWDERS

DOGDER

Well-Known Member
Hi all. I am looking for a load for my 22.250 using 55g Nosler BT. I have just bought a couple of Kgs of RS30 and RS50 to try. I use RS50 for the .308 and it does a great job.
So can any of you point me in the right direction for a 22.50 load for these powders. Much appreciated
 
Hi all. I am looking for a load for my 22.250 using 55g Nosler BT. I have just bought a couple of Kgs of RS30 and RS50 to try. I use RS50 for the .308 and it does a great job.
So can any of you point me in the right direction for a 22.50 load for these powders. Much appreciated
Just a heads up, I’ve moved to Vit as RS production has apparently been focused on military supply. I’ve nothing to back that up 100% as read another thread this week about it but can’t for the life of me remember where I spotted it.
 
CaliberWeight
gr
ManufacturerTypeManufacturerTypeTypeCharge
gr
V5
ft/s
Pressure
bar
Charge
gr
V5
ft/s
Pressure
bar
BarrelC.O.L.
mm
Info
22-250 Rem.50HornadyV-MaxNoslerLR FED 210RS5034,03199251038,637013683600mm (1:14")59,4

22-250 Rem.55BergerFBHPNoslerLR FED 210RS5032,93150272237,035533748600mm (1:14")59,6
 
luckily i have a stock in so wont affect me for a while as i shoot probably one hundred and fifty rounds per year from the little gun
but thanks for the info. i will ask my supplier and see what he knows
 
R
Hi all. I am looking for a load for my 22.250 using 55g Nosler BT. I have just bought a couple of Kgs of RS30 and RS50 to try. I use RS50 for the .308 and it does a great job.
So can any of you point me in the right direction for a 22.50 load for these powders. Much appreciated
RS 30 on the site is listed as the faster 223 powder along with RS 40.
RS50 sounds about right but check the site as they have a load data page.
 
Think which powder is closest to varget (i know...a long time ago!) and use that powder. Varget was amazing in both .308 and 22-250.....
I thing RS50 seems to fit the bill
 
You can also email Reload Swiss with your data...barrel length & twist, bullet choice etc and they'll run a quickload sheet for you. Very good service!
 
RS recommend RS52 for 22-250 so, since you have it, RS50 would be the one to try
RS30 is too fast burning for 22-250
As DVS1 says, contact RS and give them all the details of the rifle, cartridge and bullet you want to use and they will send you back Quickload print outs with load data
I use RS52 in my 22-250 and 35.8g of powder with 50 g VMax bullets works well

Cheers

Bruce
 
thanks to all who have posted a reply
i have just bought some RS62 on a friends recommend so i will post my findings
 
Back
Top