MDT oryx

[22ppc]

Does anyone know who makes a rear bag rider for the oryx

 

[trickie]

I had a buddy make me one for mine, however if you have a buddy who 3D prints then this will help

Search Thingiverse - Thingiverse

Download files and build them with your 3D printer, laser cutter, or CNC.

www.thingiverse.com

 

[22ppc]

Don't know anybody with a 3d printer pity
but thanks anyway.

 

[Gaspode]

I think MDT actually make their own, in either aluminium or steel. Quick look at some other forums suggest that the Oryx should have Mlok slot for it but the earlier versions might not ?

 

[Gaspode]

Actually, looks like there's a bolt on version as well

Rear Bag Rider

mdttac.com

Mine came (secondhand) with a bag rider but not sure about its origin. I'll take a look later today.

 

[nun_hunter]

I think MDT actually make their own, in either aluminium or steel. Quick look at some other forums suggest that the Oryx should have Mlok slot for it but the earlier versions might not ?

I think the older ones (of which I have one) just have two small screw holes to add a piece of picatinny and then can add a generic bag rider. Unless you can find one with the correctly sized and spaced holes.

 

[Gaspode]

I think the older ones (of which I have one) just have two small screw holes to add a piece of picatinny and then can add a generic bag rider. Unless you can find one with the correctly sized and spaced holes.

So could it be this one, apparently designed for the older version MDTs withut M-LOK ?

MDT Rear aluminium bag rider- Bolt on

Aluminium bag rider for older style buttstocks with no M-LOK capability (centre to centre screw hole spacing of 40mm)

www.mcavoyguns.co.uk

The description gives the centre to centre screw hole spacing as 40mm. Does that match up with your version or is it earlier still ?

 

[nun_hunter]

So could it be this one, apparently designed for the older version MDTs withut M-LOK ?

MDT Rear aluminium bag rider- Bolt on

Aluminium bag rider for older style buttstocks with no M-LOK capability (centre to centre screw hole spacing of 40mm)

www.mcavoyguns.co.uk

The description gives the centre to centre screw hole spacing as 40mm. Does that match up with your version or is it earlier still ?

I've just checked mine and it must be even older as there aren't any holes at all I now realise I'm thinking of my Tikka Tac A1 chassis

 

[trickie]

I’d be careful buying the mdt bag riders. Check on their website first to ensure fit

 

[trickie]

-If you haven’t yet changed the cheek height adjustment screws, take a look at these, cheapest I could find.
Added a rubber wash onto mine

https://www.amazon.co.uk/Lukasz-Release-Thumbscrew-Bracket-Adapter-black/dp/B0BYDP2V6D/ref=sr_1_3?crid=3KZDPTQ5WDXML&dib=eyJ2IjoiMSJ9.bxHeaLnjzrai02LGPnaaxCp_minTTMHCgNCjMHqCQHvvFJ1GBzMF5nZANhy0SQuvLDJ4BZdWe0vC0HdJQa8reaxk43Zk2w0skx3wgT9RtkcnVE0i3-cyGoqOAnS6PGqt6zfih35FQNqfIA49b35YSqdlJM3j-yL4RpZadMlyDPEoJ_-jihniJXmbG_LrT7J_0oKeec096izjpfDul12tXu4x_qz0-O65-sNQCBRsoBPNpCs1BMO4mcbTEm6mvrpm1lqP7GdE8B2PCRaTEqgjwes3KN6mcGf8xvpj0_y1gYk.a4kMKt_2j-JfFMwnIn3FGdMOd3R_kaEHd5qVvXBZdEc&dib_tag=se&keywords=Thumb+Screw+Camera+Bracket+Mounting+Plate+Adapter%2C+High+Durability+1%2F4+Inch+Thumbscrew+L+Bracket+Screw%2C+Bottom+1%2F4+Inch-20+Female+Thread&qid=1709970033&s=electronics&sprefix=thumb+screw+camera+bracket+mounting+plate+adapter+high+durability+1%2F4+inch+thumbscrew+l+bracket+screw+bottom+1%2F4+inch-20+female+thread+%2Celectronics%2C127&sr=1-3

 

[Rusty Gate]

Does anyone know who makes a rear bag rider for the oryx

MBE Ballistic Soloutions I believe do

 

[Rusty Gate]

-If you haven’t yet changed the cheek height adjustment screws, take a look at these, cheapest I could find.
Added a rubber wash onto mine

https://www.amazon.co.uk/Lukasz-Release-Thumbscrew-Bracket-Adapter-black/dp/B0BYDP2V6D/ref=sr_1_3?crid=3KZDPTQ5WDXML&dib=eyJ2IjoiMSJ9.bxHeaLnjzrai02LGPnaaxCp_minTTMHCgNCjMHqCQHvvFJ1GBzMF5nZANhy0SQuvLDJ4BZdWe0vC0HdJQa8reaxk43Zk2w0skx3wgT9RtkcnVE0i3-cyGoqOAnS6PGqt6zfih35FQNqfIA49b35YSqdlJM3j-yL4RpZadMlyDPEoJ_-jihniJXmbG_LrT7J_0oKeec096izjpfDul12tXu4x_qz0-O65-sNQCBRsoBPNpCs1BMO4mcbTEm6mvrpm1lqP7GdE8B2PCRaTEqgjwes3KN6mcGf8xvpj0_y1gYk.a4kMKt_2j-JfFMwnIn3FGdMOd3R_kaEHd5qVvXBZdEc&dib_tag=se&keywords=Thumb+Screw+Camera+Bracket+Mounting+Plate+Adapter%2C+High+Durability+1%2F4+Inch+Thumbscrew+L+Bracket+Screw%2C+Bottom+1%2F4+Inch-20+Female+Thread&qid=1709970033&s=electronics&sprefix=thumb+screw+camera+bracket+mounting+plate+adapter+high+durability+1%2F4+inch+thumbscrew+l+bracket+screw+bottom+1%2F4+inch-20+female+thread+%2Celectronics%2C127&sr=1-3

That’s what I use
I bought the smaller stainless version for the remainder of them. Has a hex Allen key type head with a flip over ring to finger tighten

 

[22ppc]

Thanks for all the help, going to try making my own