Mergers again.

finnbear270

Well-Known Member
Been on charge since running external battery to flashing red 2%, before running on internal power.
Charging time at present is a total of 30 hours plus.:mad:
Onboard battery showing 87%, I am hoping it is the "Quality" charger this time, I really don't want trouble right next to February, if Mergers have to go back.

What problems are evident with these chargers?, seem to remember a comment or two.:-|
 
Last edited:
Hi,
My ATN won’t charge or is extremely slow if the charger puts out less than 2 amps.
Makes a difference which socket I plug into.
This shouldn’t apply if using a dedicated charger.
Ken.
 
About an hour ago I noticed the charger (Pulsar) was quite warm, where normally stays cool, batteries are now up to full inboard, & almost full outboard, seems these chargers are shall we say, A bit hit & miss.
 
I thought the internal battery was buggered on my Mergers. I had drained the battery completely. Took 2 day to recharge, works fine now
 
I think and have told Pulsar the charges- cables are junk

They didnt care

Finn have you made sure you are using the plug supplied ?
 
Try a mophie USB-C GaN charger.
Has 3 x 100w USB-C charging ports and 1x 12w USB charging post.

They are expensive, but they just..... work. I use them for all charging, phone, iPad, thermal etc
 
When I had a Helion I proved the Pulsar charger and cable were bolox. I substituted a free short usb lead and used an iPad charger (12 watt 2.4 A ) and it solved the problem.
 
Pulsar charging equipment, I think I may have isolated the problem, I just pulled the C plug out of the USB adapter, & plugged the C into an apple C charging plug, batteries now happily flashing away.
 
I use a Belkin 30amp dual charger ,pulsars charger is a slug with a broken sliver in comparison.
And my Pulsar batteries for xq 50 used to do 2.5 to 3 hours now only 2 hours tops ,very frustrating.
 
Back
Top