long_range_rob
Well-Known Member
Avoid Summit seats. Rail is too low, plastic work breaks and the rot really fast from the inside to the point where they fail in a few years. Go for Keith’s High Seats.
Metal High seat recommendation
- Thread starter Stevec66
- Start date
One other thing about high seats That isn’t generally mentioned. If there is a back rail for you to lean against make sure it is not straight up. That make it really uncomfortable. All chairs are build with the back at an angle, I think it is 7 Degrees. You want to be comfortable if you are sitting up there for potentially 4 hours.
I wouldn’t buy one without the angle built in, no matter how well made. My personal opinion.
I wouldn’t buy one without the angle built in, no matter how well made. My personal opinion.
Agreed - the only downside to Keith's seats in my opinion (I've got about 5 i think). But easily remedied by loosening the backrest screws, inserting a wedge under the lower edge and tightened the screws back up. 5 mins max and saves hours of discomfort!
What I find odd is he doesn't have trade membership on here as it would make good business sense to advertise on SD...Agreed - the only downside to Keith's seats in my opinion (I've got about 5 i think). But easily remedied by loosening the backrest screws, inserting a wedge under the lower edge and tightened the screws back up. 5 mins max and saves hours of discomfort!
Yes he gets put fwd but only when a HS thread pops up.
Unless you build it yourself..!!
Similar threads
