Wanted: N140 or similar for reloading .303

quarrystalker

Well-Known Member
Looking preferably for some N140 for .303 reloading. I have read on here that Reloader 15, Vecton sp7 & TU3000 are also good to use, so wondering if anyone had something suitable near the Cambridge area ?

Dan
 
N140 or N150 was the "go to" powder use by the guys that won prizes in competitive .303 SMLE and No4 shooting. And by all those that also aspired to!
I do have some N150 for .308 that I could use in a pinch, but wanted to have a different batch of poweder instead of using the one I share with a mate. We have a round that works well in both our rifles sharing the same primer/powder/bullets so wanted some powder I could keep seperate to work a load up for in the .303
 
Lovex list 5 powders for 303, S060, D073.4, D073.5, D073.6 and S062. They highlight S062 as most suitable, I've used D073.5 and D073.6 in 223, 30/30 and 308 and found it pretty accurate (for me:rolleyes:) I also use their D036 in 357 mag and light cast boolit loads along unique lines, in 30/30 and 308 right up until I found out it's a bit wafty to use light loads of ball powder .
Try https://explosia.cz/app/uploads/2016/11/reloading_Lovex_EN.pdf for details.
 
Last edited:
I saw your add. shame it can`t be posted as I`m the other end of the country. I see the likes of spud reloading have some, but it costs half again just for shipping :(
Which is why its best to put your location in the subject line, saves wasting everyone’s time.
 
Which is why its best to put your location in the subject line, saves wasting everyone’s time.
it`s in the first post 👍 & if someone is serious about buying or selling something, it`s hardly an onerous task to click on their profile. I have seen posts where someone has listed something & then you can click on their profile, see their location & if your serious about buying, then you can make further enquiries.
 
Lovex list 5 powders for 303, S060, D073.4, D073.5, D073.6 and S062. They highlight S062 as most suitable, I've used D073.5 and D073.6 in 223, 30/30 and 308 and found it pretty accurate (for me:rolleyes:) I also use their D036 in 357 mag and light cast boolit loads along unique lines, in 30/30 and 308 right up until I found out it's a bit wafty to use light loads of ball powder .
Try https://explosia.cz/app/uploads/2016/11/reloading_Lovex_EN.pdf for details.
Thank you. I went to my local rifle range & found they had a selection of powders in there. I was recommended someramshot powder & they are ordering me some hornady bullet heads to try out as well. I already have some PPU bullets to try.
 
Back
Top